Installed some side steps on my LJ

Noxid

TJ Enthusiast
Original poster
Supporting Member
Joined
Jan 23, 2022
Messages
130
Location
Saint Johns, FL
I found a set of OEM Side Steps on Facebook Market place for the cheap the other day and grabbed them. I wasn't looking for side steps. I don't know that I needed side steps.... but they were not far away and priced right. So yeah.... I wanted some side steps all of a sudden. :)

They were pretty rough and rusty, but came with all the hardware.

i-7P68pcJ-XL.jpg


So after a night of the metal parts taking a bath in rust remover, I took a wire wheel to them and then primed and painted them.

i-k84NrTM-XL.jpg


i-2BHMWvJ-XL.jpg


i-9v8NXGX-L.jpg


Then came the adventure of installing Rivnuts in the frame since my jeep didn't come from the factory with side steps.

i-FDKkNGT-L.jpg


I made my own Rivnut installation tool, using a long bolt a threaded coupler and a couple of washers and an impact driver.

i-KkgwCH5-XL.jpg


Rivnuts installed! That was easy.... (there were only 8 to do)

i-VMJfHkG-XL.jpg


My order of Cerakote trim treatment finally arrived and I was able to refresh the plastic steps.

i-zrGtXpw-L.jpg


This went on super easy and ends up dry to the touch in maybe 10 min of leaving the steps out in the sun. Bonus points for not being greasy or slick as well, time will tell how long the steps stay black but they sure do look a lot better than when I got them.

Here they are installed.

i-s335MsC-L.jpg


i-2GTDPgh-XL.jpg


i-vvp9368-L.jpg


Was a fun project that now gives me a place to knock the sand off our feet when we are leaving the beach.
 
Last edited:
Glad you got them on, I wish I could get $20 for mine. I should probably tell somebody they are for sale, I hear that's a good first step.

lol.. yeah. I see them all the time for $50 or $100 here in the Jacksonville FL area.... they don't last too long it doesn't seem. But first you have to list them if you want to get the cash... Good Luck!
 
  • Like
Reactions: pagrey
Ha! I didn't post earlier because like you, that's all I saw. Glad you said it first.

I copied a link and only got this. :(

Welcome to the Two Wheeled Texans community!
wave.gif
Feel free to hang out and lurk as long as you like. However, we would like to encourage you to register so that you can join the community and use the numerous features on the site. After registering, don't forget to post up an introduction!
 
  • Haha
Reactions: RINC
I copied a link and only got this. :(

Welcome to the Two Wheeled Texans community!

View attachment 338958 Feel free to hang out and lurk as long as you like. However, we would like to encourage you to register so that you can join the community and use the numerous features on the site. After registering, don't forget to post up an introduction!

Zing!
 
I copied a link and only got this. :(

Welcome to the Two Wheeled Texans community!

View attachment 338958 Feel free to hang out and lurk as long as you like. However, we would like to encourage you to register so that you can join the community and use the numerous features on the site. After registering, don't forget to post up an introduction!

busted.. yeah I copy/pasted my post I made on my motorcycle forum that I am active on. I am still the noobie over here, and presumed the links would work as they all go back to my photo site where the pics are hosted. https://www.dukesphoto.com/Other/Jeep-TJ-Unlimited-Side-Steps-Install/n-3FWFwP/
 
Nobody has them in the NE, the brackets disintegrate after 3 winters

And the guy the sold them to said I will end up hating them as much as he did. Not because of a rust issue but he kept hitting his leg getting in / out of the jeep.

Its still new to me so I am happy right now. I also like that its less than 10 min to take them off if I want too. Here in FL I don't have rock crawling adventures ahead of me any time soon, but certainly lots of beach time.
 
I found a set of OEM Side Steps on Facebook Market place for the cheap the other day and grabbed them. I wasn't looking for side steps. I don't know that I needed side steps.... but they were not far away and priced right. So yeah.... I wanted some side steps all of a sudden. :)

They were pretty rough and rusty, but came with all the hardware.

View attachment 338959

So after a night of the metal parts taking a bath in rust remover, I took a wire wheel to them and then primed and painted them.

View attachment 338960

View attachment 338961

View attachment 338962

Then came the adventure of installing Rivnuts in the frame since my jeep didn't come from the factory with side steps.

View attachment 338963

I made my own Rivnut installation tool, using a long bolt a threaded coupler and a couple of washers and an impact driver.

View attachment 338964

Rivnuts installed! That was easy.... (there were only 8 to do)

View attachment 338965

My order of Cerakote trim treatment finally arrived and I was able to refresh the plastic steps.

View attachment 338966

This went on super easy and ends up dry to the touch in maybe 10 min of leaving the steps out in the sun. Bonus points for not being greasy or slick as well, time will tell how long the steps stay black but they sure do look a lot better than when I got them.

Here they are installed.

View attachment 338967

View attachment 338968

View attachment 338969

Was a fun project that now gives me a place to knock the sand off our feet when we are leaving the beach.

Nice job and that is an absolutely beautiful LJ
 
  • Like
Reactions: Noxid
that’s one clean ride you’ve got there. my tj came with the side steps and the wife likes them especially after the 3.5” lift. i very seldom use them myself.
 
  • Like
Reactions: Noxid