Is anyone running 17x9 wheels?

[crossbonesmotorsports]

OK here is the question. I'm getting some BFG KM3 315 70 R17 tires and need rims.
Looking for 17 X 9 and thinking backspacing of 4.50.

Like a needle in a haystack to find something not so exspensive.

Currently run a 4.5" lift with 1.25 Body lift.

On a 98 TJ wrangler Sport with 5 x 45 Bolt Pattern

Anyone run anything like this?

 

[06lj]

The Procomp 1069 are highly regarded, affordable and close to your needs. The 17x9 have a -6mm offset which I believe equals 4.75" backspacing.

 

[crossbonesmotorsports]

Since I have a 8.8 rear and it being slightly narrow than stock, maybe a 3.75 backspacing?

 

[Okcpuckfan]

I am running these, they are 8.5” wide. I run a 35x10.5 on them and like them a lot.

https://tinyurl.com/4x4bc39a

 

[Tray Burge]

I'm running 33's on 17x10.5 with (I believe) 5-5.5 BS. on a stock lift.
I did have to adjust the bump stops on the steering.
These are the same as the post above, Vision's Manx too.
I love em!

 

[Hirschauer]

Hi there,

have 5 of those rims on sale since a while - please see the specs in my post (link below)
If you are interested, I can see how we can bring them to your place.

https://wranglertjforum.com/threads/ultra-wheels-for-sale.53560/

 

[JeEpErSCrEePeRsS]

I’m running 17x9 -14 dirtylife roadkill with 32s not sure on my lift yet haven’t had a chance to measure it was on there when I got it but I’m thinking about 4”

 

[Mike_H]

I have some AEV Pintlers from a JK that I use. 17 x 9 with a 5.5'ish backspace. With a 1.25" adapter, I'm at 4.25 BS. Works good for me.