I just did a transmission swap. My other transmission was slipping bad. But the new transmission came out of a running jeep. I was told.... Runs perfect in drive shifts thou all gears perfect. Once warm I put in reverse it boggs down lose all power. It feels like my drum brakes are locked up. There not it just feels like it. Just replaced them..When I shift to neutral from reverse it revs up then comes down to idle.
Jeep looses power in reverse
- Thread starter jeeptime
- Start date
Non electronic transmission
Possibilities-
- blocked valve/pinched line
- some type of fluid transfer issue
I know this isn’t much to go on...posting to help your thread get stay up.
Possible power flow issue giving you a trans brake sort of effect? Like a valve body issue or internal leakage causing 2 clutches to be applied when they shouldn't be.
Not up on my Chrysler power flows so I found this looking. A lot of good info.
https://wranglertjforum.com/threads/sonnax-article-on-the-32rh-common-problems.24165/
Not up on my Chrysler power flows so I found this looking. A lot of good info.
https://wranglertjforum.com/threads/sonnax-article-on-the-32rh-common-problems.24165/
Having the same problem it sounds like rpms go way up and then back to normal when shifting but when shifting in reverse it dies not e erveytime though and just had transmission rebuilt did you find what you're problem was
Similar threads
