- Price
- Cheap
- Location
- San Diego
Looks like some of the great minds think alike. Below is a list of parts that have been gathering dust. I'll do my best, but time stamp gets the win. I'd prefer the responses stay here unless a deal promotes a private message, which is where we'll work out delivery. I'm in the east county of San Diego so I'd prefer you either come pick this up or we can meet. Not huge into shipping but if something you really want, I guess USPS flat rate is probably the best. We can work that out. I have PayPal and Venmo.
The list is below and the attached pictures are below that. I'll cross out the stuff that gets sold.
Cheers!
1. Green military surplus tow rope, 2" wide, about 30' long. $10
1b. Yellow tow rope. New, only taken out of the plastic. 2.5" I think and about 20' long. $10
2. Amazon/eBay LED headlights (blackout) with pigtails. Seem like good quality, back is made of metal and front glass is in good condition. These worked fine when removed, I'm just old school and the LED style lights are not my thing. $40.
3. These are home-brew tailgate stabilizers. These were lying around the shop after taking them off my old Cherokee and they wouldn't support the liftgate anymore. I made brackets to attach to the tailgate and then the flat part of the fender above the third taillight connection. Worked GREAT and held the tailgate open with my 33" tire when parked on a hill. I attached a picture of a company that sells these for reference. I took the pained and drilled off after installing the MORyde when I went to 35s. The other one is unpainted and undrilled. $20/each.
4. Lucas Oil Synthetic 75W-90 gear oil. I know, not used in our Jeeps but maybe you have use for it in something else. $20 for both, never opened.
5. Coax CB cable. Was having a hard time getting my SWR number down, so tried this heavy duty cable. It worked a little, but ultimately it was my antenna. This is some nice cable. I'll trade this for a tall-boy microbrew of your choice.
6. Hahaha, after installing the hood vent, was getting the typical hot air through the vents. Bought this cowl vent cover thinking it would help...and it might have, but I didn't like how tall it was. Never installed. $10
7. Cutoffs from a dried out airhose. The Schrader side is an open chuck and blows air when not attached. The other side is your standard quick connect. I'll take another tall-boy microbrew of your choice for this one too. (Shit, this might be a reoccurring theme)
8. Rusty's track bar for a 4" lift, good condition. It's missing this: https://www.rustysoffroad.com/products/rustys-adjustable-track-bar-loop-end-22mm-with-12-sleeve which is $81. The whole TB new is $237. I'll take $40 and then you have a pretty nice adjustable TB...
9. OEM Rubicon (241) transfer case linkage. All bushings are in good condition. $10
10.OEM Bumperettes, front and rear. These have the Chrysler logo on the backside, not sure if that matters. These are the milk jug eliminators. $30 for all four. SOLD
11.OEM Bumpers. SOLD
12. Spare tire spacer/1" lift. This was on it when I bought it. Helps 33s clear the top of the bumper. Unknown brand but the powder coat texture leads me to believe it's Smittybilt. Switched to a MORyde. $20
13. 35-tooth speedo gear. This came out of a 96 Cherokee with an auto and 242 T-case. This is the shorter shaft. Your guess is good as mine. I'll take a tall Coors Light for this one.....
14. Sway bar connectors, frame side. These hold your sway bar up out of the way. No hardware, but it's threaded for a bolt. One set new, never used and one is used. $10/each set.
15. OEM Tub guards for an Unlimited Rubicon. I'm pretty sure I have the hardware, but couldn't find it right off the bat. The more I clean out, I bet I'll find it. No membrane but has rubber padding adhesive on the backside. No damage and in good condition. $50
16. OEM steps with the U bolts and nuts. If you really want me to unwrap them, I guess I will. They are in good shape, although have been painted with like a bedliner type paint. $25
The list is below and the attached pictures are below that. I'll cross out the stuff that gets sold.
Cheers!
1. Green military surplus tow rope, 2" wide, about 30' long. $10
1b. Yellow tow rope. New, only taken out of the plastic. 2.5" I think and about 20' long. $10
2. Amazon/eBay LED headlights (blackout) with pigtails. Seem like good quality, back is made of metal and front glass is in good condition. These worked fine when removed, I'm just old school and the LED style lights are not my thing. $40.
3. These are home-brew tailgate stabilizers. These were lying around the shop after taking them off my old Cherokee and they wouldn't support the liftgate anymore. I made brackets to attach to the tailgate and then the flat part of the fender above the third taillight connection. Worked GREAT and held the tailgate open with my 33" tire when parked on a hill. I attached a picture of a company that sells these for reference. I took the pained and drilled off after installing the MORyde when I went to 35s. The other one is unpainted and undrilled. $20/each.
4. Lucas Oil Synthetic 75W-90 gear oil. I know, not used in our Jeeps but maybe you have use for it in something else. $20 for both, never opened.
5. Coax CB cable. Was having a hard time getting my SWR number down, so tried this heavy duty cable. It worked a little, but ultimately it was my antenna. This is some nice cable. I'll trade this for a tall-boy microbrew of your choice.
6. Hahaha, after installing the hood vent, was getting the typical hot air through the vents. Bought this cowl vent cover thinking it would help...and it might have, but I didn't like how tall it was. Never installed. $10
7. Cutoffs from a dried out airhose. The Schrader side is an open chuck and blows air when not attached. The other side is your standard quick connect. I'll take another tall-boy microbrew of your choice for this one too. (Shit, this might be a reoccurring theme)
8. Rusty's track bar for a 4" lift, good condition. It's missing this: https://www.rustysoffroad.com/products/rustys-adjustable-track-bar-loop-end-22mm-with-12-sleeve which is $81. The whole TB new is $237. I'll take $40 and then you have a pretty nice adjustable TB...
9. OEM Rubicon (241) transfer case linkage. All bushings are in good condition. $10
10.
11.
12. Spare tire spacer/1" lift. This was on it when I bought it. Helps 33s clear the top of the bumper. Unknown brand but the powder coat texture leads me to believe it's Smittybilt. Switched to a MORyde. $20
13. 35-tooth speedo gear. This came out of a 96 Cherokee with an auto and 242 T-case. This is the shorter shaft. Your guess is good as mine. I'll take a tall Coors Light for this one.....
14. Sway bar connectors, frame side. These hold your sway bar up out of the way. No hardware, but it's threaded for a bolt. One set new, never used and one is used. $10/each set.
15. OEM Tub guards for an Unlimited Rubicon. I'm pretty sure I have the hardware, but couldn't find it right off the bat. The more I clean out, I bet I'll find it. No membrane but has rubber padding adhesive on the backside. No damage and in good condition. $50
16. OEM steps with the U bolts and nuts. If you really want me to unwrap them, I guess I will. They are in good shape, although have been painted with like a bedliner type paint. $25
Last edited:
