Jeep Wrangler TJ Full Electric Conversions

Operation Phoenix

Zorba said:
Completely ambiguous. That number could literally be anything. ;) :D
Click to expand...

Metric system is base 10.

AI Overview

The primary difference is that the metric system is built on a base-10 (decimal) structure, while the imperial system has no single base and relies on a collection of irregular conversion factors.

-Mac
 
  • Like
  • USA Proud
Reactions: John Cooper, sab and rasband
macleanflood said:
Metric system is base 10.

AI Overview

The primary difference is that the metric system is built on a base-10 (decimal) structure, while the imperial system has no single base and relies on a collection of irregular conversion factors.

-Mac
Click to expand...

Base what? That number could be anything from two to over fifty-seven googolplex! Now if you're talking about base TEN, that's different story!

Never mind, I'm just pullin your leg with a mathematical joke. :D ;)
 
Last edited:
  • Like
Reactions: JMT, John Cooper, sab and 1 other person
  • Like
Reactions: John Cooper and macleanflood
Wildman said:
It sounds more exhaust than anything to me... But that is just me...
Click to expand...

My ignorant and uninformed opinion agrees with you.

I'll get the bellhousing Friday night, swap it in and really lock down the exhaust.

Based on the oil we're good.

IMG20260415165352.webp
IMG20260415154917.webp
IMG20260415154422.webp
IMG20260415152848.webp


-Mac
 
  • Like
Reactions: bbaldwin237, Irun, FarFire70 and 3 others
Zorba said:
Base what? That number could be anything from two to over fifty-seven googolplex! Now if you're talking about base TEN, that's different story!

Never mind, I'm just pullin your leg with a mathematical joke. :D ;)
Click to expand...
Zorba knows why I'm confused... :ROFLMAO:
 
  • Haha
Reactions: John Cooper and Zorba
Runs, drives, knocks...think I need to pull the oil pan...I think the rods are hitting the bottom of the pan. I couldn't find anything about clearancing the oil pan for a stroker...but that would make sense.

Pan also leaks. Any suggestions for a decent oil pan or should I just suck it up and pull the one off my original engine.

Bell housing arrived. Pulled the transmission. Swapped everything over. Bolted everything up.


View: https://youtu.be/gf9mr0bKBsQ?si=7gpY1zD19q8rfnSH

IMG20260417192940.webp
IMG20260417175115_01.webp
IMG20260417163411.webp


-Mac
 
  • Like
Reactions: MichaelGH, FarFire70, John Cooper and 6 others
No knock! Couldn't sleep. 2:30 am pulled the exhaust... having a v band just under the skid makes this easy...pulled the pan. Greased up a bunch of washers. Mopped the metal out of pan. Right stuff and a copper washer on the oil drain plug. Torqued everything up. Fresh oil.

If I had run it a bit longer it was self clearancing...


View: https://youtu.be/RCUn3bopISA?si=9cxUIqHhcZzBG3hh

IMG20260418035505.webp
IMG20260418035216.webp
IMG20260418035046.webp
IMG20260418034401.webp
IMG20260418034023.webp
IMG20260418034025.webp


-Mac
 
  • Like
  • Love
  • USA Proud
Reactions: MichaelGH, FarFire70, bbaldwin237 and 9 others
macleanflood said:
No knock! Couldn't sleep. 2:30 am pulled the exhaust... having a v band just under the skid makes this easy...pulled the pan. Greased up a bunch of washers. Mopped the metal out of pan. Right stuff and a copper washer on the oil drain plug. Torqued everything up. Fresh oil.

If I had run it a bit longer it was self clearancing...


View: %5BURL%5Dhttps://youtu.be/RCUn3bopISA?si=9cxUIqHhcZzBG3hh[/URL]

View attachment 683661View attachment 683662View attachment 683663View attachment 683664View attachment 683665View attachment 683666

-Mac
Click to expand...


Dang Energizer Bunny at it again....... or possibly a Chipmunk on crack....... 🤣 🤣 🤣
 
  • Haha
  • Like
Reactions: Wildman, Zorba, Apparition and 3 others
macleanflood said:
No knock! Couldn't sleep. 2:30 am pulled the exhaust... having a v band just under the skid makes this easy...pulled the pan. Greased up a bunch of washers. Mopped the metal out of pan. Right stuff and a copper washer on the oil drain plug. Torqued everything up. Fresh oil.

If I had run it a bit longer it was self clearancing...


View: %5BURL%5D%5BURL%5Dhttps://youtu.be/RCUn3bopISA?si=9cxUIqHhcZzBG3hh[/URL][/URL]

View attachment 683661View attachment 683662View attachment 683663View attachment 683664View attachment 683665View attachment 683666

-Mac
Click to expand...


YOU never cease to AMAZE me.

UNBELIEVABLE. Congratulations!
 
  • Like
Reactions: Wildman, ColoJeep, John Cooper and 2 others
macleanflood said:
No knock! Couldn't sleep. 2:30 am pulled the exhaust... having a v band just under the skid makes this easy...pulled the pan. Greased up a bunch of washers. Mopped the metal out of pan. Right stuff and a copper washer on the oil drain plug. Torqued everything up. Fresh oil.

If I had run it a bit longer it was self clearancing...


View: https://youtu.be/RCUn3bopISA?si=9cxUIqHhcZzBG3hh

View attachment 683661View attachment 683662View attachment 683663View attachment 683664View attachment 683665View attachment 683666

-Mac
Click to expand...


Seems so simple once you see the problem , until then you question every mechanical thing you've ever done . Great Job Mac !
 
  • Like
Reactions: Wildman, John Cooper, macleanflood and 1 other person

Similar threads

DaveF
2021 PNW4WDA Trail Jam
Replies
30
Views
4,025
Wheeling Trip Pictures & Videos
DaveF
DaveF
ac_
Arizona Sycamore Creek
Replies
1
Views
632
United States
ac_
ac_
Wildman
Washington Operation Shore Patrol September 17, 2022
Replies
0
Views
644
United States
Wildman
Wildman
jsfoster75
Tennessee Anyone know of any Northeast TN Trails?
Replies
0
Views
450
United States
jsfoster75
jsfoster75
59 wagon man
Utah Any ghost or old west towns near Moab?
Replies
0
Views
660
United States
59 wagon man
59 wagon man
Top Bottom
Back