Passenger side upper control arm bracket purchase advise

[AndyG]

Please advise me what to purchase and what to avoid , I don't want to go down the road if some oddball bushing or any weirdness..want to weld it on, prime and paint , put the arm in , bolt and go ....it is for the front passenger upper.

 

[hosejockey61]

Front or back, and frame or axle side?

Artec makes good stuff.

 

[AndyG]

Front or back, and frame or axle side?

Artec makes good stuff.

Front or back, and frame or axle side?

Artec makes good stuff.

Front , thanks , who stocks their products

 

[hosejockey61]

Front , thanks , who stocks their products

They do.

 

[AndyG]

I am positively out of my mind trying to get anybody to get me a part number online or on the phone.

Why on Earth does it have to be that hard to locate this product?

 

[Brianj5600]

A lot of those brackets are made for bigger axle tubes. A little more care has to be taken to get the angle right, but no big deal.

 

[AndyG]

A lot of those brackets are made for bigger axle tubes. A little more care has to be taken to get the angle right, but no big deal.

It doesn't matter , I simply can't find one or get Artec to answer.

 

[Akitadog]

UCF makes one for the stock bushing.
UCF-TJ/LJ PARTS

I used M/C so I can use their bushing to match my arms.

 

[fooey]

How about the Currie version?

https://www.rockjock4x4.com/tj-lj-johnny-joint-housing-kit

 

[AndyG]

How about the Currie version?

https://www.rockjock4x4.com/tj-lj-johnny-joint-housing-kit

I'm trying to stay with the stock bushing diameter for now because I don't want to get into a bunch of mixed parts.l

 

[astjp2]

artec is about a mile from my work. lmk if I can run down there for u. Tim

 

[AndyG]

artec is about a mile from my work. lmk if I can run down there for u. Tim

Man thanks... if I don't have any relief by Monday I'll shout .

 

[someguysjeep]

https://www.rustysoffroad.com/build...ustys-control-arms-front-upper-mount-kit.html
only 1 i find beside Currie. but i'd gusset that probably

 

[Brianj5600]

I like the Ballisitc Fab mount, but not wild about the uniball. I wonder if a JJ could be fitted with a little machine work? My RF UCA bushing is not tight in the tower and I don't want to fix it again later.

https://www.ballisticfabrication.com/products/jeep-billet-upper-control-arm-tower

 

[AndyG]

I like the Ballisitc Fab mount, but not wild about the uniball. I wonder if a JJ could be fitted with a little machine work? My RF UCA bushing is not tight in the tower and I don't want to fix it again later.

https://www.ballisticfabrication.com/products/jeep-billet-upper-control-arm-tower

That is a nice , simple design , much like the one on the differential end .