XCRN
Reaction score
604

Joined
Last seen

Latest activity Postings Attachments Images About

    • XCRN
      XCRN replied to the thread Grill insert.
      Yeah that is true. Mine has certainly rough on paint too
    • XCRN
      XCRN replied to the thread Grill insert.
      Ill be one to claim this. Even with a V8, I can barely get up to temp in the winter with even more restrictive grill inserts than the...
      • IMG_8436.jpeg
    • XCRN
      XCRN replied to the thread Rubicon Gears.
      5.3, AX15, 32s, currently 3.73 but even that is more than what I need. I have previously had 3.08 with the LS when I was still running...
    • XCRN
      XCRN replied to the thread Rubicon Gears.
      Cool easy enough. Thanks for clarifying that!
    • XCRN
      XCRN posted the thread Rubicon Gears in TJ General Discussion.
      So I just got a set of Rubi Dana 44 axles for the price of a single regular Dana 44 axle and super excited to get the set under my TJ, however I...
    • XCRN
      XCRN replied to the thread AX15 Input Shaft Repair.
      This is the original bushing that I put 30k miles on before swapping setups. Not the best pics, just zoomed in screen shots of what I...
      • IMG_8389.png
      • IMG_8388.png
    • XCRN
      XCRN replied to the thread AX15 Input Shaft Repair.
      They definitly think the bushing can be used. I cleaned the tip a bit and measurements came in closer to 0.746 to 0.748 so I think that...
    • XCRN
      XCRN replied to the thread AX15 Input Shaft Repair.
      Does anyone know what an acceptable amount of wear is? Before I was able to clean the shaft I took some calipers to it (I know not the...
    • XCRN
      XCRN replied to the thread AX15 Input Shaft Repair.
      How far do I have to go to get the input shaft out? Most rebuild videos they go to the very end to take the shaft out but I think its...
    • XCRN
      XCRN replied to the thread AX15 Input Shaft Repair.
      That what I was wondering. Something like can you spin the tail shaft with a machine and use a cutter like a lathe to machine the tip...
    • XCRN
      So pilot bearing took out the input shaft on my AX15 from my install mess up. Looks like where the pilot bearing goes it wore down that...
      • IMG_8373.jpeg
    • XCRN
      XCRN replied to the thread More Clutch Issues.
      Well crap, I guess chock this one up to learning not to trust the bearing was greased enough when new. Also need to find an input shaft...
    • XCRN
      XCRN replied to the thread More Clutch Issues.
      Pilot bearing got exploded. Was not a good sign when a little needle roller dropped out of the initial gap made separating trans from...
      • IMG_8366.jpeg
      • IMG_8373.jpeg
    • XCRN
      XCRN replied to the thread More Clutch Issues.
      Went back to issues right away and feels worse now since its now lurching where it didn't before. Only other thing I can think of is...
    • XCRN
      XCRN replied to the thread More Clutch Issues.
      So did some more playing around. Swapped the old master/slave cylinder in and it kind of helped and changed the trans fluid and that...
  • Loading…
  • Loading…
  • Loading…
  • Loading…