What soft top hardware do I need?

[FadeToGray]

I just picked up a used factory Soft Top for my 2005 LJ, but it didn't come with any of the mounting hardware. I do already have the rear retainer bar clips / tailgate bar.

Are the parts below all I need to order, or am I missing something else?

https://www.quadratec.com/products/11132_9103.htm
https://www.quadratec.com/products/11132_9102.htm
https://www.quadratec.com/products/11132_9148.htm (x4)

Thanks!

 

[bobthetj03]

You'll need door surrounds for both doors.

https://www.amazon.com/dp/B07GZCXFWX/?tag=wranglerorg-20

 

[FadeToGray]

Does anyone know if the LJ and TJ share the same bow brackets? I'm having a hard time finding that out and the website searches I'm using at Quadratec, 4WD, etc are filtering them out when I specify my vehicle.

But I'd assume they were the same, no?

 

[jeepndogs]

Those look to be the same as mine on my Lj.

 

[MountaineerTom]

I thought I read somewhere that the bow brackets were different between the TJ and LJ.

 

[MountaineerTom]

You could contact Bestop and see if they will sell you just the LJ bow brackets.

https://www.quadratec.com/sites/default/files/installation_instructions/145723.pdf

Part number 478.37 Left
Part number 478.36 Right

I don't know if you'll need the bracket bolts or the knobs on the ends of the bows or not though.

 

[Bigbysmalls]

Did you ever figure out the deal with the brackets?? I'm in the same boat at the moment.

 

[FadeToGray]

Sorry I ended up getting a set from another LJ, so I never found out if they were the same as on the TJ or not.

 

[jwilson2899]

The brackets are definitely different between TJ and LJ. On a TJ there are 2 tabs that stick out of the roll bar pad, and both bows attach to the bracket. On the LJ there is only one tab, and only one bow attached to it.