Where is the best place to connect for a LED lightbar?
- Thread starter Larry Hall
- Start date
Do what @Mr. Bills suggested in another thread.
Pull the cover from the power distribution box (next to the battery) and use a "add-a-circuit" fuse tap for a circuit you know is ignition hot such as the blower motor.
You can get them at most auto part stores, or here on Amazon:
https://www.amazon.com/dp/B0742BZXC2/?tag=wranglerorg-20
Pull the cover from the power distribution box (next to the battery) and use a "add-a-circuit" fuse tap for a circuit you know is ignition hot such as the blower motor.
You can get them at most auto part stores, or here on Amazon:
https://www.amazon.com/dp/B0742BZXC2/?tag=wranglerorg-20
TJ Jonny
TJ Enthusiast
I wired my lights directly to the battery with a switch on the dash going to the new weatherproof relay under the hood. This way I can flip it on if I need lighting without starting her up. I personally recommend wiring it this way and not tapping into existing electrical fuses.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
X2. All of my LED lightings is wired to the battery via a relay. Doing it in this configuration allows the relay to take the load of the lightbar and not the switch.
