Wiring cleanup

[DonW]

I'd like to clean up all the accessory wires coming directly off the battery of my 2005 TJ. Any recommendations on a simple, non-fused terminal strip or similar? All the existing wires are low current, with the exception of the winch which will remain on the battery terminals.

 

[gogetter]

I've been happy with these terminal blocks for my Jeep's electronics. I use it for everything from 10 to 1/0 gauge as long as you use the correct ring terminals.
https://www.amazon.com/dp/B076C46DP1/?tag=wranglerorg-20
I'd also suggest adding these colored label zip ties along the length of each wire in the engine bay so you can quickly determine what each wire is powering.
https://www.amazon.com/dp/B07FKPC596/?tag=wranglerorg-20

 

[pagrey]

I run a single wire to a marine breaker and then run accessories from that breaker. It works and is pretty inexpensive, here's the breaker I've used.

https://wranglertjforum.com/threads/what-fuses-and-relays-should-i-use.33182/post-538457

 

[DonW]

I've been happy with these terminal blocks for my Jeep's electronics. I use it for everything from 10 to 1/0 gauge as long as you use the correct ring terminals.
https://www.amazon.com/dp/B076C46DP1/?tag=wranglerorg-20
I'd also suggest adding these colored label zip ties along the length of each wire in the engine bay so you can quickly determine what each wire is powering.
https://www.amazon.com/dp/B07FKPC596/?tag=wranglerorg-20

Thanks! I’ll check these out.

 

[DonW]

I run a single wire to a marine breaker and then run accessories from that breaker. It works and is pretty inexpensive, here's the breaker I've used.

https://wranglertjforum.com/threads/what-fuses-and-relays-should-i-use.33182/post-538457

Got it, thanks For replying.