What did you do to your TJ today?

Have any other pictures of that Jeep? Can't decide between 31 and 32. Looks good.

This is the only other one I have here at work... I have no lift on the TJ the 31's are tight, I wouldn't go 32 without a lift...

1665506872132.png
 
Gave it a dust bath. Yep, even the CA duster is purple. LOL Going to drive it to work tomorrow since my new to me truck sprang a leak. Thank goodness I bought the extended warranty on the truck. Although only owning it for a month you would think they would back it. I am thinking it's the water pump. From what I read, one has to tear half the motor apart to change it. Again, thank goodness for the extended warranty. LOL Gives me a great reason to drive the Jeep though. :D

24DDA867-A2D1-4FDA-A4D8-D5B2026D9100.jpeg


E4ED30B0-9AED-40FA-B40D-67898C40933C.jpeg
 
Pulled the broken piston and cleaned up the block some. I need to get some good degreaser and get all the nooks and crannies while I have it torn apart and waiting for parts for the rebuild. Hopefully I’ll have it back up and running by the weekend if all my deliveries show up on time. I see one small scratch on the cylinder wall and a little bit of normal ( I’m assuming) wear.

DF4F02CE-26BC-4684-84A2-775F2CFFBE9A.jpeg


CB5F9C34-01CF-4BC2-898E-D427B0DDB7AE.jpeg
 
Took my scrap metal and an old car battery to the metal recycling place near me in the Jeep today, and used 4H a tiny bit while in the yard at low speeds since it was all dirt and gravel and a fun little climb to the car scale. Need to check my tires tomorrow to see if I picked up any nails, screws or anything else possibly stuck in the tire from there.

Decided to play around with building and replacing my Jeep's stock antenna with a DIY fractal antenna. It'll definitely look nicer without the stock external antenna. Might mount it behind the fender or under the cowl.

IMG_20221011_195212.jpg
 
Last edited:
I gazed down at mine with googley eyes. Tomorow, I take it to a buddy's repair shop to have the evap check engine light fixed. Over the weekend there is some planned welding and some bolting on of bolt on parts. Weather sure is nice now.

hell yes it is. Ill bring mine over so we can put my Savvy body lift and MORE motor mount lift on. 🤪
 
Was going to see about hooking up the heat exchanger I got for a probably vain attempt to get some of the moisture to condense out of the compressed air before it goes into the tank. Said heat exchanger has 9/16"-18 threads (a hydraulic standard) unbeknownst to me. A pair of $5 adapters (to 1/4" NPTF) are now on the way...

@KimsJeep would like the heat exchanger, its purple!
51f.JPG
 
Was going to see about hooking up the heat exchanger I got for a probably vain attempt to get some of the moisture to condense out of the compressed air before it goes into the tank. Said heat exchanger has 9/16"-18 threads (a hydraulic standard) unbeknownst to me. A pair of $5 adapters (to 1/4" NPTF) are now on the way...

@KimsJeep would like the heat exchanger, its purple!
View attachment 366184

You do tend to have a lot more humidity to contend with then here in the PNW.
 
I gazed down at mine with googley eyes. Tomorow, I take it to a buddy's repair shop to have the evap check engine light fixed. Over the weekend there is some planned welding and some bolting on of bolt on parts. Weather sure is nice now.
View attachment 366131
I'm stopping by to put a vinyl wrap on your hood and maybe some well placed Hello Kitty stickers I have leftover. :)

Hello Kitty.jpg
 
Last edited:
Was going to see about hooking up the heat exchanger I got for a probably vain attempt to get some of the moisture to condense out of the compressed air before it goes into the tank. Said heat exchanger has 9/16"-18 threads (a hydraulic standard) unbeknownst to me. A pair of $5 adapters (to 1/4" NPTF) are now on the way...

@KimsJeep would like the heat exchanger, its purple!
View attachment 366184

Is that the trailer you pull behind your Jeep?