Axle tube jack adapter

I didn't know I needed that for my stock jack. :unsure:

1732373925983.png
 
  • Love
Reactions: John Cooper
Rubiconned said:
I have a standard bottle jack so I welded one up for free using two pieces of scrap metal similar to this:

View attachment 574618
Click to expand...

I was considering making one but for $24 it was worth it. I can use it on my Jeep, my 4x4 Superduty and my Sprinter. The Superduty has always been difficult with very little room to place a bottle jack on the front.

I still want to make a cradle for lifting the front diff evenly all at once with a floor jack. They sell then for big $$$
 
  • Like
Reactions: Wildman
TheBoogieman said:
Then where will all my Hi-Lift jacks go? I need people to see them. ;)
Click to expand...

Mount Hi-Lifts in all four corners with pneumatic cylinders to actuate the handle up and down, a seperate cylinder for the up/down pawl, a solenoid valve block, some leveling sensors, and an Arduino board to control everything piped to a 8" LED screen mounted in the most obnoxious place you can find in the cab.

I wonder if I can get AI to draw a picture. =)

-Mac
 
  • Love
Reactions: TheBoogieman
Top Bottom
Back