Swaybar link help

[bobthetj03]

Looks like an older Rancho lift kit with fixed length lower arms, RS9000 shocks with the adjustable knob. If I'm measuring your tape correctly, it looks like a 2.5" lift with 3/4" spacers to level out the front. I would just do some google-ing and find some fixed length end links for a 2.5" lift and rock on.

 

[Sleejet]

Can't seem to find black fixed sway bar ends that are adjustable. My links are 10" center to center of the eye.
Also what size jounce bump do I need to replace mine, are they all the same?

 

[JMT]

Can't seem to find black fixed sway bar ends that are adjustable. My links are 10" center to center of the eye.
Also what size jounce bump do I need to replace mine, are they all the same?

I’ve never seen fixed that are also adjustable. These fixed are 9.5” eye to eye, not black though.

https://www.quadratec.com/products/...m_medium=smartcart-addtocart&utm_campaign=cse

Get some Crown jounce bumpers

https://www.extremeterrain.com/crown-automotive-jounce-bumper-9706-tj.html

 

[Sleejet]

Jtm, thank you for your help. I can paint them black. They say there for the rear, does that matter? Will I need any other hardware with the link bars?
Also are the jounce bumps the same for the front and rear? Sorry about all the question, I'm new to all this jeep stuff.

 

[JMT]

The Crown jounce bumpers will work front or rear.

These front sway bars should work. The main hardware piece you need is included. May need some nuts and bolts from your local hardware store. Use Grade 8.

https://www.extremeterrain.com/zone-offroad-products-zone-tj-zonj5303.html

 

[Sleejet]

Cool, thanks again

 

[HarveyJeep]

They look like Rough Country quick disconnects or something similar. Do you disconnect your sway bar when off-road? If so, consider the JKS quick discos. If not, get a standard sway bar link of the proper length (0-10* above level)

I have a question for you, I have sway bar links like this,

https://steinjager.com/shop/Sway-Bar-End-Link-Kit-Quick-Disconnect-1997-2006-6-Inch-Lift-J0030840

and the u shaped housing that would secure the pin head in place, under spressure from spring, cracked on one of them during my last outing. I am curious if you are aware of a replacement housing, rather than needing to buy all new sway links....

 

[JMT]

I have a question for you, I have sway bar links like this,

https://steinjager.com/shop/Sway-Bar-End-Link-Kit-Quick-Disconnect-1997-2006-6-Inch-Lift-J0030840

and the u shaped housing that would secure the pin head in place, under spressure from spring, cracked on one of them during my last outing. I am curious if you are aware of a replacement housing, rather than needing to buy all new sway links....

Is something like this what you are looking for?

https://www.summitracing.com/parts/...MIrteI27qY2wIVy8DACh1SUAxLEAQYBSABEgKCFvD_BwE

 

[HarveyJeep]

Is something like this what you are looking for?

https://www.summitracing.com/parts/...MIrteI27qY2wIVy8DACh1SUAxLEAQYBSABEgKCFvD_BwE

I am looking for the piece at the opposing end of this piece. It is the end housing with a dog house shaped opening, and spring loaded to hold the ball joint in place. No clue where to find or how to search that.

 

[JMT]

I am looking for the piece at the opposing end of this piece. It is the end housing with a dog house shaped opening, and spring loaded to hold the ball joint in place. No clue where to find or how to search that.

Those I don't know about. Hopefully this bump will alert someone else who may know. Otherwise, call Steinjager. Name is German, they make these parts on machines they have somewhere.