Wildman's TJ is getting a face lift

Wildman said:
So can I....
Click to expand...

1753742965380.gif
 
  • Haha
  • Face Palm
Reactions: Jamison C, rasband, Apparition and 2 others
lBasket said:
View attachment 633461
Click to expand...

Didn't say for how long... Just than I can... Plus even if the cable breaks I can still shift it...

But you're not helping any.... Some up with something innovative to fix this issue... Something that can actually work...
 
Last edited:
  • Like
  • Haha
Reactions: reddvltj and lBasket
Have you come across this company?
Snap-Grip® (SAM-1000) Heat Shielded Cable Bundling – ZT https://share.google/2PpasrabsVL5ZpFMA

They seem to have some clever products that are easy to install with snaps or zippers. It's all custom made so I have no clue what their prices are like. But you're in this awkward spot where even if the solution is somewhat expensive, it's necessary and cheaper than other alternatives (installing an 8-speed). Might be worth layering something else over the heat wrap you already bought.
 
bbaldwin237 said:
Have you come across this company?
Snap-Grip® (SAM-1000) Heat Shielded Cable Bundling – ZT https://share.google/2PpasrabsVL5ZpFMA

They seem to have some clever products that are easy to install with snaps or zippers. It's all custom made so I have no clue what their prices are like. But you're in this awkward spot where even if the solution is somewhat expensive, it's necessary and cheaper than other alternatives (installing an 8-speed). Might be worth layering something else over the heat wrap you already bought.
Click to expand...

That is more or less what I'm doing with the stuff I'm using from DEI except it's velcro instead of snaps or a zipper.

I'm just hoping that stacking all this stuff together can cut down on the heat on the shifter cable. I can't figure out anything else to do.
 
  • Like
Reactions: reddvltj and bbaldwin237
Wildman said:
That is more or less what I'm doing with the stuff I'm using from DEI except it's velcro instead of snaps or a zipper.

I'm just hoping that stacking all this stuff together can cut down on the heat on the shifter cable. I can't figure out anything else to do.
Click to expand...

I'm optimistic that the new wrap, new exhaust wrap, new tune, and trans cooler fix will have you up and operational! 🤞🏼
 
  • Like
Reactions: reddvltj, FarFire70, Wildman and 1 other person
bbaldwin237 said:
I'm optimistic that the new wrap, new exhaust wrap, new tune, and trans cooler fix will have you up and operational! 🤞🏼
Click to expand...

Only time-trail time will tell.... Need to get it out and work it. Granted I haven't tried driving it @ 70 MPH down the freeway but that isn't what it's made for either.
 
  • Like
Reactions: reddvltj, FarFire70 and bbaldwin237
Wildman said:
I don't have to either... You guys are wasting bandwidth and sounding like broken records...
Click to expand...

But its more fun this way!

Seriously - I do feel for ya. You've been "running the gauntlet" with your Jeep the last couple of weeks. Hopefully, when you see the light at the end of the tunnel, it isn't the headlight of an approaching train!
 
  • Like
Reactions: lBasket
reddvltj said:
What about plain old stainless steel shifter cable? No plastic to melt....
Click to expand...

Find me one that will replace a Winters shifter cable. 4' long with 3" stroke & 1/4 x 28 threads on the ends of the cable. Even a OEM style would work but none fit without a ton of mods.

TCI & B&M use a different size so without completely redoing everything I can't just use a cable from someone else. The only cable I could find similar was from Pegasus Racing.
 
  • Like
Reactions: reddvltj
Wildman said:
Find me one that will replace a Winters shifter cable. 4' long with 3" stroke & 1/4 x 28 threads on the ends of the cable. Even a OEM style would work but none fit without a ton of mods.

TCI & B&M use a different size so without completely redoing everything I can't just use a cable from someone else. The only cable I could find similar was from Pegasus Racing.
Click to expand...

There used to be a place in North Everett that custom made cables. I wonder if @Squatch would know if they are still open or not. I think it was called Green Shields. I think they made custom sheathed cables as well as HD winch and hoist cables.
 
  • Like
Reactions: Squatch, bbaldwin237 and lBasket
reddvltj said:
There used to be a place in North Everett that custom made cables. I wonder if @Squatch would know if they are still open or not. I think it was called Green Shields. I think they made custom sheathed cables as well as HD winch and hoist cables.
Click to expand...

https://www.gshields.com/

*Let me know if there's anything I can do to help with this, Rick. They are literally mere minutes away from me.
 
Last edited:
  • Like
Reactions: Apparition, bbaldwin237 and reddvltj
Top Bottom
Back