hear
Can't type 48 From Prosper, TX
Latest activity Postings Attachments Images About
-
-
hear replied to the thread Perhaps the last new OEM radiator.This is the logical conclusion from the prevailing line of thought here that (a) Mopar is the only viable option and (b) the TJ OEM... -
previous posts about this topic said I would die on the trail if I got aftermarket
-
hear replied to the thread Leaking rear axle seal problem.Discs or drums? For drums, I thought the SOP was to flip the plate over when re-installing because it slightly deforms when it's...
-
hear replied to the thread 10psi oil pressure?.Found this, which is what I recall reading when I did mine......and then basically ignored everything because YOLO? But like I said, I...
-
hear replied to the thread Leaking rear axle seal problem.Did you lube up the seal lip before installing?
-
hear replied to the thread 10psi oil pressure?.This is the distributor end, looks like a screwdriver. Then the pump has this “receiving” slot. And then I believe the priming...
-
-
hear replied to the thread 10psi oil pressure?.I don't remember if you NEED to remove the distributor....I don't think you do. I did, which is why I don't remember if it's required...
-
hear replied to the thread 10psi oil pressure?.Yeah, mine had 185k, daughters has 240k. The 4.0 is a workhorse, but everything wears out eventually.
-
So I did order the 1-1/16" & 1-3/16" oil pressure socket. Made install of the new one so much easier. I did clean the block port while...
-
No. Where did you get that part number? It's a crankshaft sensor for earlier model TJs (not a 2006). The parts manuals are all...
-
hear replied to the thread 10psi oil pressure?.There is a special oil pressure sensor socket you can get from the parts store, but other things can work in a pinch. Much has been...
-
Haha it’s never just a simple fix with these things… I’m going to try a reverse flush in the cooler lines today and then go from there.
-
If it took you two weeks to even look at what the problem was, then you should pay someone to repair it. 🙄
-
hear replied to the thread 32RH Running Temp Too High?.If it’s slipping that could cause the increase in temps. If there’s no material in the fluid, it could be that there is a leaky piston...
-
hear replied to the thread 97 TJ automatic does not always shift itself.I should add that for the purposes of this conversation, you should pretend you have an XJ.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
