Recent content by ArticTJ

I usually have a pole with a hole in it so I can run a bolt with a wing nut so I know the flag will not come out. I also usually have another hose clamp on the bottom of the PVC for more support.

It's my base for a flag pole mount. I can get some better pictures of it and how it looks with a flag if you are interested in it.

Finally, I got my tailgate table this weekend. It was very simple to do and didn't drill into the tailgate either!

Well here's the front end as today. Finally got the bumper with good mounting tabs for the D-Rings, and got the winch on also. I also put on the windshield spotlights.

Not sure exactly what the issue was.

Figured it out finally!!

Okay. Grounded the tail light and still no solution. Fuses are good too

I will try to post more pictures soon. Is there anything you want to see on it particularly? I am working on the front end now by adding a winch currently.

Best thing when working on the Jeep. If I don’t keep it in the Jeep then I forget about it and don’t use it.

Bulb was good. After talking to my buddy I didn’t realize/forgot the turn signal needs to be bolted down for the ground. Gonna try again tomorrow and see how things go.

Also to add. Not sure how much it helps but the right side works perfectly fine. Just the left(driver) side that has the issues

So I back tracked the Yellow mystery wire. It leads to the Green w/ Red tracer. However when I connect it to the other end of the Green w/ Red tracer. It doesn’t solve the issue. Anymore ideas?

I took my corner armor off to paint and now running into issues with my wiring. It was cut and re wired to fit through the hole in the armor. I have these three from the harness. However there’s this 4th yellow wire. It comes from the same wires as everything else. From the top. I currently...

So here is a couple of things: 1) Changed the name to Arctic Tj 2) I had a lot of free time recently, Corona Time, and got a lot done with the Jeep. I finished the paracord wrap on the steering wheel. 3) Also made the license plate bend around the corner

I have checked out this before and been planing my trip around this sight.