L
Link
TJ Enthusiast From United States
Latest activity Postings Images About
-
-
LLink replied to the thread Let the brake master go empty, what now?.Yeah keeping an eye on the master cylinder to keep it filled is the only concern. It’s amazing how fast it bleeds the system and if you...
-
LLink reacted to CreepinDeth's post in the thread Let the brake master go empty, what now? with
Like.
I have that one also, got it 8 or 9 years ago Had zero problems with that one working as well... -
LLink replied to the thread Let the brake master go empty, what now?.If you have a decent air compressor, try the vacuum bleeder from Harbor Freight. It pulls a vacuum fast and bleeds a brake system very...
-
LLink reacted to CreepinDeth's post in the thread Let the brake master go empty, what now? with Like.
I use them all the time successfully To ea their own
-
LLink replied to the thread Propane and Propane Accessories.I have a inverter generator I converted to propane. Burning propane in an engine definitely has a unique odor compared to gasoline. It...
-
LLink replied to the thread Downsizing tires for mpg.I doubt going from 31s to something smaller will have much impact on mpgs. Going from 35s or larger to smaller than 31s....yeah might...
-
LLink replied to the thread Most reliable inline-6 engines.I had a 1979 Chevy 250 many years ago. I rebuilt it. It was a gutless turd. I should have just put a 350 in it. The 292 might have...
-
LLink replied to the thread Leaking radiator.Don't go off color to determine what coolant you should be using. Color hasn't been standardized for coolants although I think it might...
-
LLink replied to the thread How to install a Ecoboost oil cooler / heater in a 4.0 and why.Neat!
-
LLink reacted to Steel City 06's post in the thread How to install a Ecoboost oil cooler / heater in a 4.0 and why with Like.
After falsely blaming my last oil cooler (an oil to air heat exchanger with a thermostat) for a loss of oil prime (actually was a bad...
-
LLink replied to the thread Leaking radiator.I think your info is good but a technical issue. You aren't seeing casting sand. Yes sand was used to cast the cast iron blocks our...
-
LLink replied to the thread What is the OPDA and do I need to change mine?.That's a loaded question. The camshaft gear drives the gear on the OPDA. This spins the OPDA and the cam sensor is on the OPDA so that...
-
LLink replied to the thread Exhaust fumes and antifreeze smell in cab.Park the Jeep outside. Remove the air intake tube. Have someone pour a little Seafoam or Gumout Regane down the intake with the engine...
-
LLink replied to the thread Leaking radiator.This year. I'm sure it would have failed sooner if the radiator cap had been holding pressure like it should have. I bought the Jeep...
-
LLink replied to the thread Leaking radiator.I'm not sure but orings do fail at times. The radiator tank is drilled and the cooler is installed before the tank is crimped to the...
-
-
Loading…
-
Loading…
-
Loading…