Pennsylvania Battery cables

Status
Not open for further replies.
Feralkid

Feralkid

Useful Idiot
Supporting Member
Joined
Apr 3, 2019
Messages
725
Location
Se pa
Price
Cost + shipping
Location
Pa
BDB0E743-2D31-4ADB-96EF-62B351BF7630.jpeg
1839B747-CA72-4666-A397-080753207CA4.jpeg
241B7C58-7405-4553-868E-040C33C4639C.jpeg
05879761-BA87-4312-A32A-D06EC3073FE2.jpeg

Got ahold of a nice battery cable crimper.

I’m offering custom battery cables at cost + shipping to forum members until I get bored or start wanting to make money.

Pm me with your specs and I’ll get back to you with a quote.
 
  • Like
Reactions: Ephry73, rasband, BlueC and 6 others
  • Like
Reactions: TRE3TOP
Pm me with lengths, guage, color(red/blk), terminals(straight/90, 5/16 or 3/8) etc...

And I will give you a quote
 
  • Like
Reactions: JMT and MikeE024
I've been looking at making some myself for mine but never got around to it. The kits I've seen look too long and would leave a lot of loose cable buggering up the engine bay. I think I'm going to take some measurements and get with you soon. Thanks for offering this!
 
Feralkid said:
View attachment 324050View attachment 324051View attachment 324052View attachment 324054
Got ahold of a nice battery cable crimper.

I’m offering custom battery cables at cost + shipping to forum members until I get bored or start wanting to make money.

Pm me with your specs and I’ll get back to you with a quote.
Click to expand...
Can you share what crimper you are using? I need one and I'm not in the cable business so I won't compete against you. Great choice on wire as well.
 
robertgreen79 said:
Anyone know the OEM length for TJs? I would love to get a set
Click to expand...

Looks like 06 would be a little more complicated than just lengths. The positive batt terminal has two wires out of it; a short one to the PDC which has a wide tab for two studs, and then a longer one down to the starter. The negative side has a cable down to the block and one up to the firewall. If I get some time tomorrow I'll try to get measurements of all of them.

I don't remember if my 99 was setup the same way. I do know it had big solid lugs instead of the thin stamped ones my 06 has.
 
freedom_in_4low said:
Looks like 06 would be a little more complicated than just lengths. The positive batt terminal has two wires out of it; a short one to the PDC which has a wide tab for two studs, and then a longer one down to the starter. The negative side has a cable down to the block and one up to the firewall. If I get some time tomorrow I'll try to get measurements of all of them.

I don't remember if my 99 was setup the same way. I do know it had big solid lugs instead of the thin stamped ones my 06 has.
Click to expand...
Is there a problem with existing wires? I’m not sure that all of them need to be upgraded. And I would prefer measurements and so on for your custom circuit. Don’t just mimick factory. What kind of fuses should be used? I was thinking mega fuses.

If you have other projects like solar chargers/inverters I can produce cables from 10AWG to 4/0AWG.
 
Feralkid said:
Is there a problem with existing wires? I’m not sure that all of them need to be upgraded. And I would prefer measurements and so on for your custom circuit. Don’t just mimick factory. What kind of fuses should be used? I was thinking mega fuses.

If you have other projects like solar chargers/inverters I can produce cables from 10AWG to 4/0AWG.
Click to expand...

I was just responding to his question about getting replacements for stock. Mine are just fine, but if I was replacing them I would at least want to match the tab on the PDC.
 
Status
Not open for further replies.
Top Bottom
Back