Aluma-J
- Thread starter sierradmax
- Start date
OP
OP
Open up your wallet. I'd have to guess that this LJ clad with aluminum is lighter than my TJ clad with steel.
OP
Is that required with Nemesis battery tray? Dimensions look just slightly smaller than the Odyssey I already have.
OP
Not sure. It's cut-out mimics the plastic castings of the top of the Optima. It's simply a bolt-on option but I'm sure something could be rigged or fabricated to house your Odyssey.
OP
It's been a few months but the light at the end of the tunnel is getting brighter. Off the List:
- Battery & custom cables installed.
- Evap canister & purge valve plumbed.
- Coils pulled, suspension cycled and bump stops installed.
- 03 dash swap and roll bar padding painted.
- UCF front and rear bumpers. Took Advantage of Warns rebate on a Warn VR EVO-10 for $250 after rebate.
- Battery & custom cables installed.
- Evap canister & purge valve plumbed.
- Coils pulled, suspension cycled and bump stops installed.
- 03 dash swap and roll bar padding painted.
- UCF front and rear bumpers. Took Advantage of Warns rebate on a Warn VR EVO-10 for $250 after rebate.
OP
Aside from some ram-assist hoses, soft-top sides, and an alignment, it's pretty much there. The Savvy skid is a nice piece. Lower links are at 10 degrees and uppers are at 0. Owner is waiting on wheels and tires. Although, doesn't look all that bad on some "JL rollers".
