Next on the weekend to do list took a turn… was expecting that this would drop in… but too snug. thinking about some advanced tetras moves but it might just be a 4 1/2” moment…
What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
Nice, please let me know what you do with the tweeters. I have similar speakers in the garage and been thinking about the best option for the tweeters at the dash and sound bar.
I put tweeters on my A piier. Double face taped it to the plastic trim. Sound is great
Discovered my fan clutch on my LJ has some pretty bad slop… good thing I caught it before it shredded the radiator
Double sided tape at the moment- playing with placement bouncing off the windshield is a close second to directly angle at me. But the mounting hardware I have can’t achieve the right angle. I might get a angle pod in the future.
Organization of the shop, and the questionable 6 speed has 2 bolts in it now. The ucf tummy tuck is next, I need to figure out how to install the low pro mount.
Thank you. I’ve looked for some pods and haven’t found any. I’ve thought about drilling a hole and placing in the top of the dash or just above the speaker area. Would need to fine a way to keep them in place.
Mudflat
TJ Enthusiast
‘Drove over to Top Swap Texas in Katy, TX yesterday to get my new Bestop Trektop NX. That’s the one that makes a bikini top when you take out the windows & half door uppers. The top over the driver & passenger seats can also flip back to make a sunroof. I wanted to send some pics of it opened up & “naked”, but it’s supposed to rain for the next couple of days so I’ll send more pics when I can.
Nathan is a great guy & does good work. He sells & installs Bestop products. Check him out at topswaptexas.com
Nathan is a great guy & does good work. He sells & installs Bestop products. Check him out at topswaptexas.com
Installed my passenger side Buchanan Precision Machine 1 1/2” seat risers. They’re high quality and I love the result!
The drivers side torx bolt is stuck so I’m waiting on an impact torx t50 bit to get that sucker out and get the drivers side done. Should be a nice improvement!
The drivers side torx bolt is stuck so I’m waiting on an impact torx t50 bit to get that sucker out and get the drivers side done. Should be a nice improvement!
I ordered these for my BLAM speakers (still to be installed).
https://www.ebay.com/itm/2760112118...pid=5337789113&customid=&toolid=10001&mkevt=1
Vendor mentioned other options for other tweeter sizes when I was looking around.
I plan to drill a hole in the pillar plastic to mount them.
This site contains affiliate links for which Jeep Wrangler TJ Forum may be compensated.
Installed these within months of getting my (used) '05. Great add-on!
I installed mine in the dash cover. They look good, and sound great. The sound bounces off the windshield and really brings the sound stage up.
Just used a hole-saw and some hot glue to mount them.
Last edited:
The 503cf come with the mounting hardware you see- the one in my fingers has the threaded nut so you can drill down from the top -set that holder in- use the backing nut from the underside to secure.
Kiwi TJ
I don't suffer from insanity I enjoy every minute
Supporting Member
Ride of the Month Winner
Kiwi TJ
I don't suffer from insanity I enjoy every minute
Supporting Member
Ride of the Month Winner
Went to a swap meet and bought a door…… the guy assured me it would fit the TJ 
It’s actually off 1930 Model A sedan.
i’m going to sign paint the door and make some garage art
It’s actually off 1930 Model A sedan.
i’m going to sign paint the door and make some garage art
Last edited:
1956 F350 Dually. It my hope to have it on the road by fall, working on the brakes/upgrade right now then see if the Y block still has some life in it.
Kiwi TJ
I don't suffer from insanity I enjoy every minute
Supporting Member
Ride of the Month Winner
Installed a power steering cooler, and swapped from the 2.5L remote reservoir to the integrated style from the 4.0Ls while I was at it. So much nicer.
That location didn’t even cross my mind. I’ve had that piece out a couple of times.
