Novak Conversions Jeep Wrangler TJ radiator

Michigan Assorted Take Off Parts From 2000 TJ

Dan The Video Man

DIY til I Die
Original poster
Supporting Member
Joined
Jul 21, 2025
Messages
117
Location
Eastpointe, MI
Price
$30-$60 + shipping
Location
Eastpointe, MI
I have a few different parts left over from some recent upgrades. Everything is in decent condition and works as it should. Both of the harnesses work well but not all factory plugs are intact. More info below.

OEM Tailgate Hinges w/hardware - $40 —- Painted tan by the previous owner. This was not a properly done paint job. Factory SILVERSTONE METALLIC CLEAR COAT is underneath. Includes original hardware. Some light surface rust on the back, easily cleaned. These work properly, I upgraded to the Moryde kit.

IMG_5435.jpg


OEM Third Brake Light - $30 —- Should work fine, it was not installed when I bought the Jeep but the PO included it.

IMG_5238.jpg


OEM Windshield Washer Reservoir, Single Pump - $30 —- This will be cleaned.

IMG_5432.jpg

IMG_5433.jpg


Tub Harness for Soft Top with Sound Bar - $60 —- The sound bar plug was replaced with a generic plug to use the dome light. I will include both sides of the plug.

IMG_5430.jpg


IMG_5431.jpg


HVAC/Dash Harness - $60 —- It appears to have the plug only for fog lights which I don't believe mine had from the factory. The portion for the fan speed is missing the plug but has spade connectors in it's place, this is how it was when I bought the Jeep and worked as it should. The plug for the cigarette lighter is also gone and was wired for an aftermarket USB charger. The factory speaker plugs are in tact but are also spliced off when someone tried to wire up tweeters. As long as I've owned it, they have not been connected.

IMG_5427.jpg


HVAC and cigarette lighter connections.
IMG_5428.jpg


Speaker Plug
IMG_5429.jpg


Picture for reference on how it was plugged into the fan speed control
IMG_5124.jpg


IMG_5430.jpg
 
  • Like
Reactions: Desert Roamer
Do you by any chance have the white plug (or the whole attached harness) that connects to the back of the clockspring? It's a 4 pin connector with 3 wires. Mine's mising the red tab that locks the wires in and, therefore, also missing the wires.
.
20251222_164713.jpg
 
Novak Conversions Jeep Wrangler TJ radiator