Did anyone jump on the Motobilt Crusher limited production front bumper order?

sierradmax · 2026-09-15T03:43:44-0600

I'm sorry but for $1,800 and raw steel. Plus, that bull bar is ugly.

https://motobilt.com/products/crusher-black-label

If some of you like it, jumped on the deal.. Good for you. Not my cup of tea and I could easily spend that kind of money elsewhere.

jjvw · 2026-09-15T05:23:32-0600

That's an expensive stubby bumper with a lot of steel packed into a small space. Post here if you like it!

L J · 2026-09-15T05:31:09-0600

ugly
blingy
expensive
hard pass

bbaldwin237 · 2026-09-15T05:32:46-0600

I don't not like it. I think it's a bit crazy to spend $1500 on a stubby bumper though (just me). I do like those recovery points though.

RangerTJ · 2026-09-15T05:33:31-0600

Not quite Grumper ugly but it's definitely in the running.

It does look sturdy.

sierradmax · 2026-09-15T05:36:48-0600

Motobilt claims the last limited production run of their crusher bumpers sold out in 4 minutes. It went live 3pm CST yesterday and I believe they're still available.

GATORB8 · 2026-09-15T06:16:30-0600

sierradmax said:
Motobilt claims the last limited production run of their crusher bumpers sold out in 4 minutes. It went live 3pm CST yesterday and I believe they're still available.

The site malfunctioned and it was sold out immediately at launch. They fixed it about a half hour later but didn’t send out a notice.

John Cooper · 2026-09-15T07:18:28-0600

Not for me.

NashvilleTJ · 2026-09-15T07:19:50-0600

Ordered!

John Cooper · 2026-09-15T07:20:47-0600

NashvilleTJ said:
Ordered!

Trying to distribute the weight equally?????

jjvw · 2026-09-15T07:24:28-0600

NashvilleTJ said:
Ordered!

I knew you would!

GATORB8 · 2026-09-15T07:29:03-0600

I guess I may as well admit it, I got #19.

bbaldwin237 · 2026-09-15T07:32:55-0600

GATORB8 said:
I guess I may as well admit it, I got #19.

Most of us could look at someone else's rig and pick out something we think is ugly or we would do different. But we get to do things our way because we like them and don't have to justify it! Except angry grilles....that shits dumb! lol

For what it's worth (not much at all), I think a build like yours and the one in their photos, it will look at home. It would maybe look out of place on a smaller build on 33s or 35s, but on a full width ton build on 40s it fits.

GATORB8 · 2026-09-15T08:05:26-0600

bbaldwin237 said:
Most of us could look at someone else's rig and pick out something we think is ugly or we would do different. But we get to do things our way because we like them and don't have to justify it! Except angry grilles....that shits dumb! lol

For what it's worth (not much at all), I think a build like yours and the one in their photos, it will look at home. It would maybe look out of place on a smaller build on 33s or 35s, but on a full width ton build on 40s it fits.

I just thought it'd look good with a bunch of ducks on it:

NDSpeed · 2026-09-15T08:34:56-0600

Still Available and $1499

sierradmax · 2026-09-15T08:36:42-0600

plus shipping.

NskLJ · 2026-09-15T08:37:17-0600

sierradmax said:
I'm sorry but for $1,800 and raw steel. Plus, that bull bar is ugly.

https://motobilt.com/products/crusher-black-label

If some of you like it, jumped on the deal.. Good for you. Not my cup of tea and I could easily spend that kind of money elsewhere.

I tried to see if I liked it but there was big white letters in front of it the whole video

That'll Buff · 2026-09-15T08:41:28-0600

Is it just me or is this extremely counterintuitive? From everything I've read you want steel to contact the rocks as it will resist the wear better, it's why @Fluxor provides stainless steel rash guards on his bumpers and sliders. Not to mention the irony of a heavy steel bumper and then making the skid of all things lightweight.

NDSpeed · 2026-09-15T09:08:43-0600

That'll Buff said:
Is it just me or is this extremely counterintuitive? From everything I've read you want steel to contact the rocks as it will resist the wear better, it's why @Fluxor provides stainless steel rash guards on his bumpers and sliders. Not to mention the irony of a heavy steel bumper and then making the skid of all things lightweight.

View attachment 710285

Probably not T6061
So will they keep replacements in the inventory?

GATORB8 · 2026-09-15T09:43:39-0600

That'll Buff said:
Is it just me or is this extremely counterintuitive? From everything I've read you want steel to contact the rocks as it will resist the wear better, it's why @Fluxor provides stainless steel rash guards on his bumpers and sliders. Not to mention the irony of a heavy steel bumper and then making the skid of all things lightweight.

View attachment 710285

You guys actually use your bumpers?

Jk, realistically since it’s a crusher underneath, it’s unnecessary since it’s backed by steel, but should keep the paint/finish from getting scratched up.

Did anyone jump on the Motobilt Crusher limited production front bumper order?

TJ Addict

AI Moderator

lights before loKCers

Get out and wheel

TJ Expert

TJ Addict

TJ Addict

Twilight Zone

I miss the snow...

Twilight Zone

AI Moderator

TJ Addict

Get out and wheel

TJ Addict

Resident Penguin Eradicator

TJ Addict

TJ Addict

New rattle = louder music

Resident Penguin Eradicator

TJ Addict

Similar threads