When you have to deal with tinnitus as I do... then you'll understand. I've done the bedlined tub before... you can have it.
What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
It had just the basic carpet kit. No padding under whatsoever. Nothing on the firewall, no vibration dampening anywhere.
Yeah I've gotta get my hearing checked again too for the whole 3M lawsuit.
Well, I got bored so I decided since the weather was so nice, I would go and paint my mirror stems. I forgot to take a before pic, but if you look at Geep4me's pics a few pages back, mine looked like that. LOL
I should have spent a little more time on the driver side, but they didn't come out to bad. I may take the driver side back off and do a second coat, but for now it works.
I should have spent a little more time on the driver side, but they didn't come out to bad. I may take the driver side back off and do a second coat, but for now it works.
Got the hardtop off!
I wish I had a taller garage...
I wish I had a taller garage...
Took it on a day trip with Mrs Willy a few towns over. Runs great with the new plugs and coil. And it sure goes 65-70 mph a lot better than my old CJ5 ever did.
got some nice weather today so I did an upgrade on the Big three.
Body ground, engine ground and alternator lead bumped up to #2 gauge
with military battery terminals.
too dark for pics, I will add them tomorrow
Body ground, engine ground and alternator lead bumped up to #2 gauge
with military battery terminals.
too dark for pics, I will add them tomorrow
12000k hid are purple. Police love them too.
Do the mirror too. Go big or go home. I love your purple.Well, I got bored so I decided since the weather was so nice, I would go and paint my mirror stems. I forgot to take a before pic, but if you look at Geep4me's pics a few pages back, mine looked like that. LOL
I should have spent a little more time on the driver side, but they didn't come out to bad. I may take the driver side back off and do a second coat, but for now it works.
View attachment 88894
My wife got pics of the kids. They're 20 and 22. I'm (irrationally) deathly afraid of heights so when I heard something about pushing somebody I had to back off from the edge. Most jeep I got in a pic was this one.
Or this one.
We'll go back, maybe in monsoon season or earlier in the snow melt. There's also a 4wd climb up Merriam crater that created the falls that we skipped this time. We're just getting started.
I too am deathly afraid of heights we have that in common.
I want to go where you are? Where is that?
I think I should have black & red shift knobs too. I like the change on the transfer case lever.
What can a class do for tinnitus? I have it as well, also a "Thank you" from the Military (Brown Water Navy).
Replace the stock head unit and speakers, thanks @Chris for your thread on that.
Put in new door hinge bushings, mine were sandwiched on top and kinda sharp edges.
And the infamous Jeep cup holders
Put in new door hinge bushings, mine were sandwiched on top and kinda sharp edges.
And the infamous Jeep cup holders
Did you spray that with a rattle can or roll it on? What kind of paint? Looks good.
Nice head unit, same one I had. I thought it was a great head unit for the price.
Capt'n
TJ Enthusiast
First coat was brushed on....RustBullet Automitive rust inhibitor. It was a bit difficult to lay down smooth by brush. I online ordered rattle can paint from "Automitive Touch Up" paint from Microfinish LLC. 2 coats of primer (colored to match base coat), 2 coats of base coat (painted matched to jeeps original color code), 3 coats of gloss clearcoat. Primer and clear coat are $10 / 12oz can. Color matched base coat is $20/ can. Paint went on easy. The color match was spot on. I even used the base and clearcoat direct over my cargo area top rail with no color contrast differences. I will be purchasing more to touch up paint parts of the exterior. Cheers.
smithcaz
TJ Enthusiast
I chopped my front bumper. Whenever I see this style bumper it looks like a mustache to me and I wanted a different look. Took the grinder and sawzall to it, sprayed it and bolted it back on. Also worked on the JK turn signal in the the grill. I don't like the orange lens so I have a set of the newer clear lens coming in the next day or two to fill in the holes.
