Search results

Apparently my voltage regulator has failed and I need to do an external bypass. While I'm waiting for shipment I'd like to do some prep and at least tap into an appropriate circuit, I need 10 amps with the ignition on. Any suggestions as to which circuit and where? This is what I'm installing...

Check gauges light came on and voltage was down to half way between red and 14v. I pulled over, left the engine running and popped the hood, all appears normal. Read a couple threads on here describing the same condition and had the alternator checked at Napa and O'riellys both said it's good. I...

Premium is going up from $40 to $60, still cheaper than OnX at $100(?) for premium or whatever they call it with private property maps. That's quite a jump and there's a lot of talk about ppl canceling, you would think they could've gone up $10.

Got a ‘chuck or three digging under the slab of my barn/garage. Over the years I’ve tried gofer bombs, snares and live traps. As the title states, I’m looking for nuclear options, I don’t have to worry about pets, children or nosey neighbors. Whaddaya got?

‘04 4.0, this is what the code reader comes up with and when I Google cps for my TJ both come up. Which one are the codes referring to ? Also, what is a good brand for replacements as Mopar are discontinued?

The sump/deep part of my oil pan is dented in about 1/2 to 3/4 of an inch starting in the front and tapering towards the middle. Does anyone know how much clearance there is between the bottom of the oil pan and the oil pickup screen? Where in the sump is the pickup located front to back, side...

Ordered a set of RS5000X's and while I was getting them ready for paint prep I noticed a few issues: First one being one of the rear shocks had some pretty prominent burrs where the ends are welded on the tubes. Got a couple very minor cuts on my fingers. Front shocks: "A" seems to be good...

I have a set of (0-2”)JKS discos on my TJ that I’m in the process of lifting 3”. I want to add the appropriate length to the set I have rather than by new ones. If you have the 2.5-6” JKS discos, could you please provide the measurement described in the pic? TIA

https://www.facebook.com/share/p/XTBqnZbaEGcWSreF/?mibextid=KkTEve

A quick search didn't find the threads/posts I was looking so here's another " help me with my lift " thread. LOL Jeep is stock '04 with 31" tires and 1" spacers on the front springs. I want to keep the "stance" I have now with stock (saggy?) springs but increase overall lift by no more than 2"...

I'll be visiting Texas in a couple weeks and while I'm there I'll be looking for a used car. If I find what I'm looking for I'll drive it back to Michigan. I assume a dealer will take care of the paperwork but how do i go about buying from a private owner? Is it as simple as obtaining the...

My yoke has a very minor “groove “ you can see it but not feel it, an awl won’t catch in it. Should I get another yoke? If I get another yoke is the “ line up the marks and count the threads” method close enough?

Having a hard time finding the SPICER part number for the Dana 35 pinion seal, the one with a FLANGE. EDIT: Found it. The pic on the Spicer site isn't clear as to whether it has the flange so I googled the part number and found this, http://www.northerndrivetrain.com/product/SPI-43085.html , BINGO!

My mechanic turned me on to this “hand cleaner “ works great and easy to use

Haven’t tried this but it looks interesting https://fb.watch/kKrb8rl1Mm/

Thinking about mounting it here Will it survive exposure to splashes of mud and water?

After experiencing several instances of having to remove broken bolts and having been mostly successful at it I am stumped by this one. It’s one of the bolts that holds the rear seat bracket down and it’s broken flush with the floor. i’ve tried drilling from the top and the bottom and it appears...

I’m looking at a rust free replacement tub for my TJ and the floor is bedlined. I would have to change the color of the tub and I want to get rid of the bedliner. I’m not sure if it’s a thin DIY job or a thicker professional job. I’ve read that a heat gun is good for removing the thicker stuff...

My daughter is having electrical issues with her Chevy traverse, I’m trying to help her find a reputable auto electrical specialist. The closer to Grand Prairie the better. Thank y’all in advance!

@DavidBT mentioned in his winch thread about not caring for Jeep/4x4 clubs and I agree. The ones around here are more focused on ducks and Jeep nights at a bar. They do trail rides but there’s usually too many ppl for my tastes as I prefer small groups. I tend to go solo because of the few...