Search results

hello thanks for the quick help that was great ! i can make good use of the diagram. I will take an 40 ampere switch... best regards frok hungary

the rotary switch on the dashboard can no longer be switched off - (ventilation flaps are blocked ... conversion) I just need a simple on and off switch - the speed is always set to slow

I would like to install an extra switch to turn the motor for the blower heater on and off. Which relay switches the blower? Can I install a switch on the relay and if so, which cable does it switch? I have already done this with the relay for the fuel pump - this is a super immobilizer (a small...

I would like to install an extra switch for the blower motor - I think this has to be done somehow via the relay. Is there a way to switch off the blower motor in general and switch it on again when required - the control panel for the air conditioning no longer has any function and the switch...

I would like to install an extra switch for the blower motor - I think this has to be done somehow via the relay. Is there a way to switch off the blower motor in general and switch it on again when required - the control panel for the air conditioning no longer has any function and the switch...

I would like to install an extra switch for the blower motor - I think this has to be done somehow via the relay. Is there a way to switch off the blower motor in general and switch it on again when required - the control panel for the air conditioning no longer has any function and the switch...

Thank you all. No , I will not be replacing the fuel line ... that is solid and all working - DEI heat shield I ordered from amazon - thanks for the idea. I'll leave the plastic clip as it is - doesn't bother me.

Hello and best regards from Hungary! My old TJ has a little problem again. For months the tailgate has only been able to be moved with a lot of force - oiling the pins has not brought any improvement. Do I need to replace the pins and how do I do it - do I have to unscrew the whole hinge? And...

Hello and best regards from Hungary! My old TJ has a little problem again. For months the tailgate has only been able to be moved with a lot of force - oiling the pins has not brought any improvement. Do I need to replace the pins and how do I do it - do I have to unscrew the whole hinge? And...

Hello and best regards from Hungary! I wanted to change a fuel hose just before the fuel rail, but I realized that it is not a fuel hose at all, but just a kind of protection for the fuel line underneath. Do I see that right ? and what is the plastic clip there for .... How much pressure does...

Hi guys, Another little problem, hopefully you can help. Jeep runs well when it runs. When starting it runs very rough (15 seconds, revs start at 500 and slowly work their way up to 1000 rpm and then stay constant) - looks like the engine is not getting the right mixture to start. Throttle body...

Does anyone know this spare part? A friend of mine would like to sell this spare part - it is said to come from a 1998 TJ ... I have a TJ myself - but this spare part is completely unknown to me. Thanks a lot Edgar from Hungary

Hello, again a question from Hungary with a request for help. A year ago complete converter renewal with automatic transmission renewal. Overhaul Master Kit. Since one month very sporadically a speed-dependent noise between converter and engine outlet - where the black rubber sleeve sits (Output...

I have the same problem. I want to make a metal rod - what is the length in cm? Sorry, come from Europe.... the diameter is not more than 6 mm, right ? Thanks and greetings from Budapest, Edgar

Maybe the same theme... When I step on the brake and release, I have a clicking noise in the selector lever from the ATG (when releasing....). This problem is unfortunately not 100% reproducible and only occurs in the "D" position. When touching the selector lever, the noise can also be felt -...

Where is NSS switch physically located ? I haven't found anything yet - but I'm sure I've been looking in the wrong place. Can someone please post a picture of the NSS in the installed state ? Thanks from Hungary, Edgar

Hello mots, Still working. No rust. No leak - all good. I'll leave it that way now - the winters are getting warmer and warmer in Europe - that's enough for heating. I have expanded the bypass in the meantime. Bypass Heater Core - new heating

aaahhh, right - 14 and 15 are Pins and not separatly relays. My fault. Easy. Can I use the connection between these two pins to build a push start button (with wires inside the cabin and so on...)? Should actually work ... BTW: Forget German jeep forums (I'm also a member) - people only complain...

Hello @qslim, Which pins have to be bridged (from 14 to 10)? I am stranded with my 1999 TJ - ignition problem (actuator brocken,as has often been discussed) - I now have to do ignition bypass with a push start button, otherwise my wife will no longer have to drive the jeep 500 meters to the...

Unfortunately my ingnition cylinder lock broke in a parking lot and the TJ can no longer be started - all electrics work, everything is ok, but the starter motor does not start. How can I start the Jeep TJ in emergency mode so that I can at least get home? Cable bridges? Best Regards, Edgar...