Search results

I been having intermittent bucking while accelerating with p0016 with p0344 codes. 2 years ago I put in the crown OPDA, no issues until now. My question...after you take off the cap to the OPDA, is it ok to have slight left right and up down play on that hole dial that is in housing? Does a...

Was having acceleration bucking intermittent every few weeks and indicator light finally came on for me to get codes checked at auto store and 0016 and 0344both came up. I changed the OPDA (2 years ago) due to a little noise in OPDA, gear wasn't bad at all, did not put original OEM pigtail...

hi all. 2005 91,000 miles. first time this happened i was in the red Empty zone, needed gas. My emissions light came on, (stays on, not flickering) and jeep was bucking when i was getting up to shift into third and fourth then it drove ok during a steady speed. I got gas and the bucking stopped...

Help! This front seal is not coming out! The one right behind harmonic balancer, crank pulley. We tried everything, seal puller, putting screws in, they just slip out and tear up inside of seal, sprayed it with pb blaster. It is getting so buggered up. Any ideas would be great!

Hi all. Was doing my pulley and belt addition and before we tackled it my man noticed the crankshaft damper with a bit of a wobble. I had no noise whatsoever or any shake. I get Mopar when it is possible, I would like to know, if I cannot get Mopar damper is there a worth it alternative? Also...

Doing a water pump and iust took off serpentine belt, and noticed the idler pulley and tensioner pulley have nicks that I can feel with fingernail. Had no other issues prior. I think they spin ok, the idler pulley has some give when it spins and the tensioner spins fast. Is that how they are...

Had noticed leaking under water pump area, maybe leaking from weep hole. Wanted to do a flush before changing water pump. Put the Prestone flush/cleaner in for the 10 minute flush, could still see the wetness under pulley, drained it, put water in, up to temp, then again, and the second time...

2005 lj. Curious where the reading is on your gauge on the dash when it is at optimum temperature? I'm sure I will be told to buy a gauge for a more accurate reading, but I don't have one yet and am curious where it should be. Mine is between the half and 3/4 mark, closer to 3/4. Thank you

Hi. 2005 LJ 90,000 miles. Noticed a steady drip, it is radiator fluid coming from behind the very bottom pulley, from what looks has the oil pan behind that area. Drip is wet, like water, not oily. Starting from top, working my way down, I felt to see if it was wet, not wet anywhere but that...

86,000miles 2005. Past few months jeep has been doing intermittent starts, every few weeks I would turn key to start, would get the first sound of start sequence and then get a loud thunk!,(da, thunk) then nothing. Tried key again, silence, lights come on that's it. After a few tries it...

hi all. started to hear a noise while slowing to stop. coming from the passanger rear, sounds like a rubbing while spinning, it is not a screeching or metalic sound. It gets louder when applying brakes. It still happens even when not touching the brake. I do not see any liquid on rim or tire...

hi all, Ive been having starting issues, searched forums and none are quite what is happening to mine. it does not happen every time I try to start it, been going on for about 3 weeks, when it does happen i turn key and sometimes Ill get a clunk, that first sound when starting then thats it...

2006 Not with the oem, but...Have always had a subtle vibrating/rubbing on window sound when I use rain x wipers. I just put on Bosh icon and they are very nice but when I use wipers they do a trippy movement on the window, kinda like a quick small back and forth movement as it's going across...

Updating for anyone with future issue. I got some vacuum tubing from auto parts store, went everywhere, no one had exact size elbow tube. I unhooked battery for about 4 hours, hooked battery up with new tube connected and she drove fine right off the bat, no sputtering at all, Yayyy. And that...

Thank you all very much for your help. Greatly appreciated. Let's hope this will fix my noise issue. I'll post after I put new tube/line

Thank you for your help. And for putting a name to the parts. It's all very interesting and I like learning whatever I can.

That is what I was wondering and hoping. I will buy some new vacuum tubing if I can't find the exact rubber elbow tube. And, let it run like you suggested. And cross my fingers. Any thoughts on how long it will take to (relearn)? Is sitting idle enough or will driving be better? (country roads)

And when the line is completely off the Jeep drives completely fine no idle issue at all. It is only when the stretched out tube is put back on the nipple it then stalls

The green tie tube goes right below on the nipple with the pencil. And it is a long grey wire that goes to passenger side of jeep down below the battery and connects to what seems right onto the inside body of jeep. Now that you can see the photo do you still feel the tube/line is the vacuum...

Thank you! now I know what things are called and search for. I searched brake booster and read to do a check, the response said to""unhook vacuum hose and plug it with a bolt, if that cures it and the hose is still good then you have an issue with the booster itself"" My question is how do you...