Search results

I have a 1997 TJ 2.5 l. It has been sitting for about 2 months and was running fine prior. I went to start it the other day and it ran fine for about 5-10 minutes and then started sputtering and missing and then shut off. Tried restarting it it would just sputter Miss and shut off again. If I...

So I have a auto trans leak on my 97 TJ. I bought the dye to do a leak test but it does not say how much dye to use. It is a 1oz bottle. Should I dump the whole bottle in or can I do 2 trans with 1 bottle? There is no instructions on the bottle. I would like to do my TJ and a GM TH350.

SO MY tj has been sitting and went to start it and nothing. Jumped it and ran it for awhile and all good. A week later dead. I use to sit for months and would start right up. Only thing that has changed was I put the factory rear wiper setup in. Will that have a draw even when Jeep is off?

97 TJ 2.5L. I put a new T-stat in last fall and necer got really any heat and the guage was always about 170. This week I pulled it apart and found the stat stuck open. I did a cleaning/flush, all new hoses, new Stant Superstat 195 amd mew T-stat housing. Still have the same issue. With the...

Does anyone know where to get just the rubber that goes between the outside door mirror and the door? I am missing 1. I found them with the mounts but just need the rubber.

My 97 TJ with just heat has a broken blend door actuator arm. I have been looking up threads on how to fix it. My question is 1- how do I get the metal retaining clip off the arm. 2- how doe the actuator come ot for more room. 3- is the other arm going to be in my way' The broken arm is on the...

Does anyone place sell a complete cowl screw kit? One that includes the u-clips and push in nylon nuts? Mine are all miss matched and damaged.

I need new hardware to mount my windshield frame, mirror's and stock fender flares back on the TJ. I see both OE steel bolt and stainless steel. What should I use. I know the stainless used on my boat is not as strong as steell screws/bolta.

Have a set of front DANA 30 and rear DANA 35 3.73 axles from a 98 TJ. was wondering how much to sell them for, a fair price? I am sure they would need new u-joints and service them. Thanks

Came out of a 98 Wrangler TJ 2.5L soft top, no a/c wire harmesses. Under hood fuse box harness, under dash fuse box harmess and frame rail harness to trans and fuel tank All look good, can ship. Make a reasonable offer and take them.

So I took a wire wheel to some bubbling paint on my windsheild frame. It turned into a big rot hole. What are my options? I just had new glass put in last december and was told there was no rust. If I get another frame how do I know it is not rusted inside? I guess that is one place water was...

Has anybody used Rustoleum bed liner spray on there fender flares? If so how did it work out and how should I prep them before spraying? Thank you

So I am thinking about painting my TJ. I do not know what color I should paint it. I do not want the black anymore.I am thinking some kind of blue or a hunter green. This is not goping to be a show paint job just want it to be all one color Any thought would be great and does not need to be a...

So my trans fer case is stuck in 4WD and it sounds like the chain ships at times. I just pulled it but have not opened it up. I can not move the shift lever. When I hold the 2 shafts and move 1 there is about 1/4 - 1/2 when measuring the out side of the yoke to the case. I will open it next time...

So I am looking to replace my front u-joints. I was looking to get the Spicer 5-1310X but while looking these Dana njpimts also come up. So what is the difference besides non-greasable and greaseable? See link...

So my 97 has a ALPINE head unit and someone put 4" speakers in the dash using zip ties and they are broken. I am thinking of replacing the head unit with a JVC KD-TD71BT and was looking at the dash speakers Pioneer TS-A462F A-Series 4"x6" 3-way car speakers not looking to spend alot or for big...

I am looking for the vacuum line harness that goes from the heat control panel to the vacuum actuators for the heat doors under the dash. It is for a 97 TJ with only heat. I looked in the parts book and got #4864-998 which does not come up with a GOOGLE search. I prefer to get it new not used...

So I have 2 issues with the heater controls on my 97 TJ. First the blower works on 2nd speed and hi speed but nothing else. Second the position selector turns the fan on/off but only blows from the defrost, no other vent controls. Any thoughts? I know tenp is cable control but not sure if the...

I have a 97 TJ that I converted from manual to automatic. Was wondering if the auto console should have a light that lights up the shifter indicator when the dash lights on? If so where would it plug into and is there a part# for the harness. I did not see anything in the parts manual.

So I bought a new door seal from Quagratec for my driverside door. It is a Fairchild Industries D3012 Driver Side Full Steel Door Seal for 97-06 Jeep Wrangler TJ . Do it came with no instruction and has all the push clip which the stock one does not. It also has a red pin but not sure if that...