mechanic

  1. joecampanella

    Nashville TJ mechanic?

    I recently purchased a 2003 Rubicon. I have been getting a grinding noise from the front end and suspect it's my wheel bearings (I already changed out my pads/rotors). Problem is my bolts for the bearings are completely seized up. Typical 20 year old Wrangler rust has built up. I've tried...
  2. KMcElfish

    Florida Mechanic in Miami Needed!

    Hey everyone! I need a mechanic in the South Florida area for my 06 Rubicon. I used Planet 4x4 before and was dissatisfied. I'm looking for a shop that can diagnose the shifting problems - the jeep is an automatic, but inconsistently refuses to shift from 2nd to 3rd) - as well as a mystery...
  3. TJoe

    Rear drum brakes chattering after drum replacement / service

    I recently had my brake pads and front rotors/rear drums replaced, as they hadn't been serviced in a while. The mechanic had to flush the rear brake fluid as well. I noticed a new chattering/chirping noise at lower speeds that stop as soon as I apply pressure to the brakes. I took it back and it...
  4. NYC-TJU

    North Carolina Good mechanic in Charlotte

    As someone who just went through the search for a good mechanic in a new-to-me area, thought I'd pass along a recommendation. H & H Automotive in the Charlotte area seems like a group of good dudes. Joe (the guy running the place) is very communicative, and willing to take the time to talk...
  5. Lisa8940

    P0016, U0168, and P0516 codes

    Hello, I own a red TJ and so far I have taken it 4 times to the mechanic because the engine light won’t go off. A couple months ago I had a blinking engine light and I brought it in to the mechanic and he said it was the crankshaft and that’s what was causing the problem. Then the light came...
  6. D

    Durham NC mechanic recommendation

    Looking for a mechanic in the Durham/Raleigh NC area to make some suspension and possibly gearing changes. Thanks. [Noob here, hope I posted this correctly]
  7. oscaralexander

    Arizona Any reliable Jeep mechanics in Phoenix area?

    Hey all, About 2 1/2 years ago I wrecked my 2006 4.0 automatic in a collision which left it with a broken motor mount, transfer case, front axle, fenders, and shocks. My parents, found this 2005 4.0 automatic near Yosemite which had a rollover in 2005 and was originally going to be...
  8. G

    Portland, OR mechanics recommendation (electrical)

    I have a 2002 Jeep TJ SE that has been reliable for me for years. I started having starting issues a couple of months ago and after replacing my starter, battery cables, and an attempt at replacing my multifunction switch pigtail connector, it is still not starting! I have followed some advice...
  9. 944matt

    Changed heater core, now no start

    What’s up guys, new member here. I changed my heater core and now I have a no start issue, car does not crank. 2005 LJ unlimited I’ve ruled out the ign switch, neutral safety switch Starter my symptoms are, turn the key to the start position, cluster turns off, interior lights turn on no...
  10. Sgt Jarhead

    Oregon Trusted Mechanic in Southern Oregon

    Looking for a trusted Mechanic in Southern Oregon. I’ll be located in Medford, Oregon and willing to travel up to 100 miles in either direction to include Northern California though would prefer someone close. I just want to have someone I can turn to in case I come across any issues in the...
  11. Wrangle_This

    Virginia Searching for a trusted mechanic in Northern VA

    I need to get my TJ checked out but I'm new to the area and don't have an inside scoop to a good mechanic. I'm hoping to find a mechanic in the Manassas or Fairfax/Chantilly area. If you know of any please let me know as I want to take it in as soon as possible. Thanks!!
  12. ALLxSAINTSxDIE

    Belt tensioner bolt

    Does anyone know what size or where I can find a replacement bolt? All I know is its a T40.
  13. Suzeq

    Looking for a mechanic in Rhode Island

    Hi All, I'm looking for a good mechanic near West Warwick/Warwick, RI. Is there anyone out there who can help? Thanks!!