steering shaft

Hi i just bought my Wrangler TJ 4.0 from 2006 and now i recognized that my Steeringwheel and the attached Upper steering shaft moves in and out. It is Not really loose - it doesn‘t wiggle around. It just slides in and out. the Upper steering shaft slides Here (See picture). I attach a Video so...

Hey guys, I have been tracking down loose steering on my Jeep. I have a large dead zone and it is very loose, it feels very unsafe on the highway. I have found that where my steering shaft goes into my steering box, there is a lot of play and no movement in the pitman arm. I slightly tightened...

Hello All, I have a 2003 TJ X with the 4.0 in it. Im looking at getting a new lower steering shaft as i have a ton of play in my steering and i believe this is my issue. Im running 33x12.5 tires, i can find the 97-99 steering shafts but having an issue with ones that fit a 03. Any ideas?

My lower shaft is stuck on the spline and I cant get it off. I've tried using a crow bar and leverage, PB blasted is 3 times, and used heat. Its still on there. Any advice is welcomed and needed!

I have a 03 TJ with a 4 in suspension and 3 in body lift. My upper u joint slipped off on a trail ride the other day and i am going to replace it asap. Do I need a longer shaft or can I get an OEM replacement?

So recently, my Jeep has been riding really rough. I have had other people in the car say that it feels fine so my thoughts is something is a little off in the steering shaft. I read that you can replace the steering shaft bushing and that helps but I am wondering what else could be going wrong...

I have an 05 Rubicon TJ that has a clunk feeling in the steering. I have narrowed the culprit to the slip joint on the upper steering shaft located at the fire wall. My question, can I drill and tap a set screw in the slip joint, or is this joint meant to be telescopic to make up for movements...