Adjustable, stick-on rear-view mirror?

[WLDRIDE]

Has anyone found a smallish, adjustable, stick-on rear-view mirror that I could mount in the spot indicated in my photo? I sit up pretty high in my TJ so I never use my regular rear-view mirror because it is right in my line of sight; I just use the mirrors on the doors. But, when my top is down and my doors are off, it would be nice to have a small rear-view mirror right here.

And, I don't think a suction cup mount would work because that surface is not flat and not smooth.

 

[Irun]

Interesting timing. I've been looking at making something like this work.

https://www.amazon.com/dp/B07MBB9XP2/?tag=wranglerorg-20

 

[Moab]

They have a ton that clamp into your existing mirror. That u could modify and tape on.

https://www.amazon.com/dp/B07567QLTX/?tag=wranglerorg-20

 

[Irun]

Has anyone found a smallish, adjustable, stick-on rear-view mirror that I could mount in the spot indicated in my photo? I sit up pretty high in my TJ so I never use my regular rear-view mirror because it is right in my line of sight; I just use the mirrors on the doors. But, when my top is down and my doors are off, it would be nice to have a small rear-view mirror right here.

And, I don't think a suction cup mount would work because that surface is not flat and not smooth.

View attachment 266857

I just did this...

https://wranglertjforum.com/threads/a-lesson-learned—keep-it-light-and-nimble.44924/post-929761

 

[Rescue6]

Have you spun your mirror upside down so the nighttime lever is on top. It will gain you an inch or two to help get it up higher

 

[Indy05Rubi]

Might be too small, but I stuck these to the upper corners of my windshield to use as blind spot mirrors when I'm running w/o doors...might work for your need?

https://www.amazon.com/gp/product/B0777JTJGJ/?tag=wranglerorg-20

 

[ManWithJeep]

They make mirror risers for tacomas. The mirror mount on your windshield is the same. Just a 3-4 inch bar that attaches to the current mirror mount and has it's own mirror mount at the top. You would just have to measure to make sure it wouldn't be too tall and hit the top of the jeep frame.

http://www.birddawgindustries.com/tacoma-mirror-riser.html

 

[rasband]

I found the same intrusion, and mine had enough room to be shifted up close to that level pulling it a good bit out of my way. Nothing aftermarket was necessary, though I realize it could have moved even more with the same windscreen mount + glue.

I used the area you’re looking to use for a radio head.

 

[AndyG]

A baby mirror for a windshield and 3m tape will work