So... While driving way to fast down a fire road I bent up some suspension components. I plan on adding currie mini skids to the lower control arm mounts but I'm unsure of how to handle the front frame track bar mount. It has a small crack and is bent. I was able to adjust my trackbar length to compensate but want to know if I can weld the crack or replace it with a stock style mount. I have a currie correct sync so I don't really want to change trackbar angles.
Bent trackbar frame mount
- Thread starter camo47
- Start date
Pics of the track bar mount?
I discovered that mine was cracked earlier this year. I patched and welded it, but it hadn't bent yet.
I discovered that mine was cracked earlier this year. I patched and welded it, but it hadn't bent yet.
Mine looks exactly like that. It doesn't look bent but I had to adjust the trackbar significantly to center the axle and didn't see evidence of anything else bending. I'm going to do the same repair. THANKS!!!
You may have bent the track bar itself.
Be sure to grind past every crack. And plate anything on the mount.
Similar threads
