Correcting speedo with Digital Dakota?

[PriddyBoy]

Has anyone ever wired one of these in? If so can you please help, the instructions are Greek at best.

Dakota Digital SGI-5E *Latest Design* - Universal Speedometer Signal Interface Controller https://www.amazon.com/dp/B014N07F8W/?tag=wranglerorg-20

 

[JamesAndTheSahara]

I can't speak for that specific model but the link below is pretty highly accredited in the Jeeper community. In the coming months I plan to switch from gear driven speedo to this one:

http://www.bluemonkeymotorsports.com/products_ht.html

One benefit is it appears really easy to wire in with the video. It may be of some use to you.

Edit: Dang I need to read closer, re-reading over your post it sounds like you have already purchased one. In the event of that, Stu has a writeup that may or may not help. It is a different product but nevertheless:

http://www.stu-offroad.com/engine/speedohealer/speedohealer-1.htm

 

[JeepZilla380]

+1 on the Blue Monkey product. It plugs into the existing harness going into the transfer case. Really simple to set up. If you haven't already started stripping wires for the Digital Dakota one, you might want to consider changing directions. If you're set on the Dakota, google this: Dakota Digital site:rubiconownersforum.com. Looks like a few posts at RubiconOwnersForum.com on it.

 

[JeepZilla380]

Oh, and apologies Chris if its bad mojo to cross post to other sites...

 

[PriddyBoy]

Oh, and apologies Chris if its bad mojo to cross post to other sites...

I'm on that one also I just like this one a lot better.

 

[glwood]

Oh, and apologies Chris if its bad mojo to cross post to other sites...

I don't think we have any issues with RubiconOwnersForum. I am a member there, and go from time to time, and have linked posts there.

 

[glwood]

I'm on that one also I just like this one a lot better.

X2. I just don't like having to sift through all the JK stuff, mostly on the new posts. Almost all of the new posts here pertain to all TJs, so here's where I hang out.

 

[JeepZilla380]

+1, I still sift through the other forums from time to time but the TJ community here is better, less trolling.


Sent from my iPhone using Tapatalk Pro

 

[grr]

I put one of these on when I installed my sssye. Have you figured out the wiring and just need help wth programming? If so I can go look at mine and tell you where my switches are set.