Currie trac bar

[Alxmarquez23]

I just recently purchased a used trac bar. The guy told me it was Currie but I don’t see a zerk fitting.
Do all Currie trac bars have zerk fittings

 

[Jerry Bransford]

That looks like a Currie to me, it looks just like mine. Perhaps the zerk fitting was knocked off or replaced with a screw to fill the hole until it actually needs greasing. Johnny Joints don't need much greasing at all.

 

[Alxmarquez23]

That looks like a Currie to me, it looks just like mine. Perhaps the zerk fitting was knocked off or replaced with a screw to fill the hole until it actually needs greasing. Johnny Joints don't need much greasing at all.

I read on another forum , on a old thread. Some of the trac bars came without a zerk fitting but a greasable bolt. Who knows if it’s true though.

 

[Alxmarquez23]

That looks like a Currie to me, it looks just like mine. Perhaps the zerk fitting was knocked off or replaced with a screw to fill the hole until it actually needs greasing. Johnny Joints don't need much greasing at all.

Oh and also no screw or anything it’s just blank

 

[Alxmarquez23]

Straight from the horses mouth

 

[rouxbicon]

I just recently purchased a used trac bar. The guy told me it was Currie but I don’t see a zerk fitting.
Do all Currie trac bars have zerk fittings

View attachment 173226

View attachment 173227

I thought the Currie track bars had an offset Johnny Joint with a reinforcing gusset...?

 

[Alxmarquez23]

I thought the Currie track bars had an offset Johnny Joint with a reinforcing gusset...?

After looking at some pictures I think you’re right

 

[jjvw]

Is there a CE-####xxx part number stamped on the bar?

It could be a JKS.

 

[Alxmarquez23]

Is there a CE-####xxx part number stamped on the bar?

It could be a JKS.

No part number. I think it’s a older style they had

 

[Alxmarquez23]

Hopefully I don’t have clearance issues with the diff cover, it’s stock so I should be fine

 

[jjvw]

Hopefully I don’t have clearance issues with the diff cover, it’s stock so I should be fine

Depends on how far the axle is pushed forward and the amount of bump stop extension.

 

[Alxmarquez23]

Depends on how far the axle is pushed forward and the amount of bump stop extension.

I actually don’t know exactly what I have .I bought my tj lifted already. I know it’s not a good lift and I want I 4 inch savvy or Currie. But it’s not in the budget just yet. I’ll add some pics Maybe someone can identify the left.

 

[jjvw]

Rancho springs and arms, likely. The amount of bump stop is the height of that aluminum puck.

I've never seen those raised axle side sway bar mounts before. And the links themselves are weird with the factory style ball joints.

 

[Alxmarquez23]

Rancho springs and arms, likely. The amount of bump stop is the height of that aluminum puck.

Thx I’m going to try Piece together a Lift. Hopefully I can use this trac bar I’m going to replace the ,j joint. Get a oem size bushing for the axle side and also bmb arp bolt and flag nut