My parking brake beeps 6 times, everytime I use it (I have a manual). So, I fixed it.
Basically, when you raise the handle, it just grounds a signal to the PCM.
I cut the wire at C301, wire C11 (gray with black stripe).
If you want, you can stop here. This leaves the brake light in the dash cluster still a part of the system, in case if have an actual brake issue. If you just cut the wire, then you will not have any indicator of when your parking brake is engaged. For some, this will be just fine.
I opted to add another light, to let me know.
I ordered this light-
https://www.amazon.com/gp/product/B07LC2QD96/?tag=wranglerorg-20
Then, I found a switched (ignition) battery positive and ran it to the LED.
The other lead of the LED I ran to the wire that I just cut at C301. I cut my wire at the bottom side of C301 (the black connector), there was more slack wire there, where the wires come out of it and then go through the firewall. I "safed off" the section of wire that heads towards and through the firewall. I tied the ground lead of LED to the section of wire that goes towards the connector.
I mounted the LED near my power port and other switches in the center console.
Here are some pics-
Basically, when you raise the handle, it just grounds a signal to the PCM.
I cut the wire at C301, wire C11 (gray with black stripe).
If you want, you can stop here. This leaves the brake light in the dash cluster still a part of the system, in case if have an actual brake issue. If you just cut the wire, then you will not have any indicator of when your parking brake is engaged. For some, this will be just fine.
I opted to add another light, to let me know.
I ordered this light-
https://www.amazon.com/gp/product/B07LC2QD96/?tag=wranglerorg-20
Then, I found a switched (ignition) battery positive and ran it to the LED.
The other lead of the LED I ran to the wire that I just cut at C301. I cut my wire at the bottom side of C301 (the black connector), there was more slack wire there, where the wires come out of it and then go through the firewall. I "safed off" the section of wire that heads towards and through the firewall. I tied the ground lead of LED to the section of wire that goes towards the connector.
I mounted the LED near my power port and other switches in the center console.
Here are some pics-