I acquired this bad boy on March 5th:
It already has 33x11 inch KO2s on stock suspension and I plan on going to 35" Milestar Patagonia when they wear out. It also needs a new catalytic converter before next march (my choice is at the bottom).
Here's my intended build list relatively in the order I plan on doing it (I'm open to suggestions if anyone thinks I'm in error anywhere):
1.25" Savvy body lift
1" brown dog motor mount lift (rubber)
5.38 differential gearing
Onboard air (ARB dual compressor)
https://www.extremeterrain.com/rockslide-engineering-rear-dana-44-differential-guard-skid-plate-8718-yj-tj.html
Transmission temperature gauge:
https://www.autometer.com/2-1-16-transmission-temperature-like-2552.html
Savvy belly armor
LCA (lower control arm) skids
Savvy 3/4 link mid arm suspension kit
Poison Spyder 0" (or negative) flares and eventually armor all the way around.
Rock hard 4x4 front and rear bumpers
Rusty's off-road tire carrier
Currie steering
Rubicrawler
Hydraulic steering assist
Either a Windstar cowl intake, a stroker, or a Banks Turbo (I heard Banks discontinued them which makes me hesitant to install one but that was my preferred option)
Exhaust: (which header would be best?)
https://www.quadratec.com/products/17601_152X_PG.htm
https://www.quadratec.com/p/hooker-...eart-shorty-header-00-06-jeep-wrangler-tj-40l
https://www.quadratec.com/products/17605_0007_07.htm
https://www.quadratec.com/products/17601_600X_07_PG.htm
It already has 33x11 inch KO2s on stock suspension and I plan on going to 35" Milestar Patagonia when they wear out. It also needs a new catalytic converter before next march (my choice is at the bottom).
Here's my intended build list relatively in the order I plan on doing it (I'm open to suggestions if anyone thinks I'm in error anywhere):
1.25" Savvy body lift
1" brown dog motor mount lift (rubber)
5.38 differential gearing
Onboard air (ARB dual compressor)
https://www.extremeterrain.com/rockslide-engineering-rear-dana-44-differential-guard-skid-plate-8718-yj-tj.html
Transmission temperature gauge:
https://www.autometer.com/2-1-16-transmission-temperature-like-2552.html
Savvy belly armor
LCA (lower control arm) skids
Savvy 3/4 link mid arm suspension kit
Poison Spyder 0" (or negative) flares and eventually armor all the way around.
Rock hard 4x4 front and rear bumpers
Rusty's off-road tire carrier
Currie steering
Rubicrawler
Hydraulic steering assist
Either a Windstar cowl intake, a stroker, or a Banks Turbo (I heard Banks discontinued them which makes me hesitant to install one but that was my preferred option)
Exhaust: (which header would be best?)
https://www.quadratec.com/products/17601_152X_PG.htm
https://www.quadratec.com/p/hooker-...eart-shorty-header-00-06-jeep-wrangler-tj-40l
https://www.quadratec.com/products/17605_0007_07.htm
https://www.quadratec.com/products/17601_600X_07_PG.htm
Last edited: