Need help removing old bump stops

[GeorgeSully]

I’m trying to get the old bump stops out but they are too stuck and too crumbly. I need some new ideas other than chisels and vise grips.

Sent from my iPhone using Tapatalk

 

[tworley]

Drill em out?

 

[jjvw]

Drill em out?

Spade bit and close your eyes!

 

[fooey]

Spade bit and close your eyes!

The safety squint!

 

[tworley]

Honestly some elbow grease is your best bet. It all crumble eventually and fall right out.

 

[BlackSheep]

razor blade or even a flat blade screwdriver. Just dig away at them, they'll crumble out as noted.

 

[Sj's TJ]

razor blade or even a flat blade screwdriver. Just dig away at them, they'll crumble out as noted.

X2 take a flat head screwdriver and pry it out. It will be a mess, but it will come out eventually. Also, spray some WD40 or equivalent as you pry the sides.


Sent from my iPhone using Tapatalk

 

[ElectricWizard]

Big screwdriver and pry it out. If it crumbles at least you're making progress!

 

[GeorgeSully]

X2 take a flat head screwdriver and pry it out. It will be a mess, but it will come out eventually. Also, spray some WD40 or equivalent as you pry the sides.


Sent from my iPhone using Tapatalk

Wd40 was exactly it and they pried right out with a chisel. Thanks


Sent from my iPhone using Tapatalk

 

[Sj's TJ]

Wd40 was exactly it and they pried right out with a chisel. Thanks


Sent from my iPhone using Tapatalk

No problem. Be sure to lube the new ones before installing them.


Sent from my iPhone using Tapatalk