Quick shock upgrade question

[Ahoragi]

www.mcmaster.com has them but you don't have to get 65. A bolt a little longer will work just fine.

Yeah what Jerry said. It will include a nut, two washers, and two bushings for each upper shock mount.

 

[EJD]

www.mcmaster.com has them but you don't have to get 65. A bolt a little longer will work just fine.

Yeah what Jerry said. It will include a nut, two washers, and two bushings for each upper shock mount.

Awesome, thanks!
I'll just go with the 70 length then if that would work, cause those I can get locally.

 

[Serbonze]

For those of you with a 4" lift and Rancho RS5000x shocks, I assume you bought the 3.5" lift version? Looking at their website they only offer them in 0, 2.5", or 3.5" lift sizes.

 

[Chris]

I would have to assume they bought the 3.5" size. Anything else would be too small.

Though you'd think even 3.5" would be too small.

 

[Serbonze]

I would have to assume they bought the 3.5" size. Anything else would be too small.

Though you'd think even 3.5" would be too small.

My 4" Currie coil springs gave me about 4.5" of lift, so I was curious.

 

[EJD]

Mine are being delivered tomorrow. Very excited to upgrade these beat up rusty old stockers.
However, the stock shocks have been doing their thing for the past 155k, so i'm also quite impressed.

 

[EJD]

I have installed all 4 new RS5000X's and I freaking love them.
Thanks again guys for the shock recommendations, hardware/torque specs, tips, and laughs along the way!

 

[Kevin E]

For those of you with a 4" lift and Rancho RS5000x shocks, I assume you bought the 3.5" lift version? Looking at their website they only offer them in 0, 2.5", or 3.5" lift sizes.

I ordered mine through Amazon for a 4-5 inch lift.

 

[Serbonze]

I ordered mine through Amazon for a 4-5 inch lift.

Link?

 

[bobthetj03]

Isn't March Rancho shock month?

 

[Kevin E]

Link?

Rancho RS5000X Gas Shock Set 1997-2006 Jeep Wrangler TJ w/4-5" Lift https://www.amazon.com/dp/B01JBLRGH8/?tag=wranglerorg-20