Ok, so I noticed there is some wiggle in/out at my front pinion yoke. I know I'm not the smartest peanut in the turd, but this doesn't seem right to me. It moves fore/aft about 1/2". Any help is appreciated
Ok, so I noticed there is some wiggle in/out at my front pinion yoke. I know I'm not the smartest peanut in the turd, but this doesn't seem right to me. It moves fore/aft about 1/2". Any help is appreciated
Its crush sleeve has some elasticity so the exact torque is not critical. If it's obvious the pinion nut is just loose, torque it to between 165-185 ft-lbs which was recommended to me by Tom Wood 17-18 years ago which has worked fine for me in the right circumstances.