Squealing from front end

[BlueChip]

Another where's that noise coming from question.....

i got a squeal that happens when:
a. First start moving


Doesnt happen when:
Rev the engine
after car is warmed up
over 30miles per hour

I replaced the Idle Pully and the Tensioner pully. - Still is happening
New belt comes tomorrow
New U Jolts come Tomorrow

anything else i should look at?

2005 LJ 6 Speed Manual

 

[Sancho]

Could be drivetrain components.... axles, shadts, joints, hubs, etc...

 

[Jablinski]

Another where's that noise coming from question.....

i got a squeal that happens when:
a. First start moving


Doesnt happen when:
Rev the engine
after car is warmed up
over 30miles per hour

I replaced the Idle Pully and the Tensioner pully. - Still is happening
New belt comes tomorrow
New U Jolts come Tomorrow

anything else i should look at?

2005 LJ 6 Speed Manual

U joints for the drive shafts coming? That would be the first thing I'd inspect based on your description.

 

[CharlesHS]

Open up the engine compartment and give a listen to the passenger side of the engine.
The OPDA bushing is known to go bad on the 05/06 model years which produces a squealing noise.
IF this is the problem; you want to replace the part sooner than later....
CROWN has the upgraded bushing installed.
You can purchase a CROWN replacement on Quadratec.

https://www.quadratec.com/products/51004_0060.htm

 

[Fishtaco]

Open up the engine compartment and give a listen to the passenger side of the engine.
The OPDA bushing is known to go bad on the 05/06 model years which produces a squealing noise.
IF this is the problem; you want to replace the part sooner than later....
CROWN has the upgraded bushing installed.
You can purchase a CROWN replacement on Quadratec.

https://www.quadratec.com/products/51004_0060.htm

Get a squeal in an 05/06 change the OPDA regardless is my thought as well

 

[Mike_H]

If it is related to motion of the vehicle, look at u joints.

 

[SvtLdr]

I'm thinking if it's triggered by the vehicle being in motion, I'd focus on chassis/ drivetrain/ brake parts rather than engine components.