Where to mount Switchpros module

[Hackyman]

Does anyone have a good idea on where to mount the switchpros module under the hood, that the dont mind sharing?

Seems it has to be on the passenger side, but where is clever?

 

[TJ Jim]

Got a pic you could share so we can start suggesting places?

 

[bbaldwin237]

Not sure what the switchpros module looks like, but this is what I did with my AuxBeam panel. I used some tube clamps around the rod and it just hangs vertically. This is the best picture I have and I'm not home to get a better one.

 

[jjvw]

From my highline fender install...

 

[Hackyman]

Thanks, I looked at the side of the fusebox, but seems tighter with stock fenders.

 

[jjvw]

Thanks, I looked at the side of the fusebox, but seems tighter with stock fenders.

You are going to have to get creative. The value of going with the SP is that it is quite small and it can go many places.

 

[Bababooey]

I mounted my SwitchPros module on the firewall, directly behind the battery. You'll have to remove the battery for access, but it fits well and you can't even see in with the battery back in place.

 

[Strizzo]

I think i might have gotten the last one of these made, but I installed the box on the drivers side fender tray. Easy spot if you don't have ABS.

 

[drdfblackm]

Still planning mine....but going to switch to a cowel intake so I have more room near the fuse box. Going to mount a bus bar on top of the battery and try and keep everything neat and tidy on the passenger side.

 

[Hackyman]

I mounted my SwitchPros module on the firewall, directly behind the battery. You'll have to remove the battery for access, but it fits well and you can't even see in with the battery back in place.

How does it fit with the PCM?

 

[mudmaster]

Auxbeam on driver's fender

 

[Hackyman]

Auxbeam on driver's fender

View attachment 691960

Thanks,

I think they want the SP9100 module to be within 24" of the battery. Or maybe I just need to get a longer cable

 

[mudmaster]

Thanks,

I think they want the SP9100 module to be within 24" of the battery. Or maybe I just need to get a longer cable

Auxbeam sells longer cables. Maybe Switchpros does also??

 

[Bababooey]

Does anyone have a good idea on where to mount the switchpros module under the hood, that the dont mind sharing?

Seems it has to be on the passenger side, but where is clever?

It’s been a few years since the install, but there was plenty of room to mount it. I don’t have any pics, but if you pull the battery, it’ll become pretty obvious.

 

[JMT]

I never liked the hangey downy location. My .02c. I HiLined and moved it onto the inner fender.

 

[Hackyman]

So I came to the obvious conclusion that I can just order a 4AWG wire with ring terminals and replace the supplied power lead, and locate it in the factory ABS tray.