Novak Conversions Jeep Wrangler TJ engine mounts

The elusive "Big Foot" of door parts (I'm beginning to think it is an urban legend)

OldGuyOutdoors

OldGuyOutdoors

Member
Original poster
Joined
Jun 9, 2020
Messages
27
Location
Signal Mountain, TN
I have a 97 TJ with half doors. The rod from the external handle to the door latch has worn out. I cannot find the part anywhere, it's the one that's approximately 6" long, threaded on one end and 90 degree bend on the handle side. All I've found are the rods for the door lock, not the door latch.

Any suggestions would be greatly appreciated as cold weather is coming and I need to put the door back on!
 
OldGuyOutdoors said:
I have a 97 TJ with half doors. The rod from the external handle to the door latch has worn out. I cannot find the part anywhere, it's the one that's approximately 6" long, threaded on one end and 90 degree bend on the handle side. All I've found are the rods for the door lock, not the door latch.

Any suggestions would be greatly appreciated as cold weather is coming and I need to put the door back on!
Click to expand...

Where are you located? There's a guy on Facebook by me on Long Island that parts out Jeeps many of them are TJ's
 
Unfortunately I have no help to offer other than my sympathies. My half doors were missing some parts when I bought them and it was a huge ordeal to find some of those items. I think I had almost $200 in small parts like that by the time they were complete. Fortunately I only had about $200 in them to begin with so I still came out ok as far as the half door market goes.
 
  • Like
Reactions: OldGuyOutdoors
OldGuyOutdoors said:
I have a 97 TJ with half doors. The rod from the external handle to the door latch has worn out. I cannot find the part anywhere, it's the one that's approximately 6" long, threaded on one end and 90 degree bend on the handle side. All I've found are the rods for the door lock, not the door latch.

Any suggestions would be greatly appreciated as cold weather is coming and I need to put the door back on!
Click to expand...

Pics??

Which part is worn? When I replaced my half door latch, the threaded section was good but the clip from the latch side which attaches to the threaded portion had slid down, pretty sure I was able to bend back in place.
 
John Cooper said:
I heard you can even get a new wife on ebay, might have to teach the English though........ :oops: :cool: :ROFLMAO:
Click to expand...

Been there, done that. I had to get a refund on mine. ;)
LoveYouLongTime.jpg
 
  • Haha
Reactions: wanderer1951, Irun, Oberst Oswald and 1 other person
Novak Conversions Jeep Wrangler TJ engine mounts
Top Bottom
Back