Jeep Wrangler PCM and module repair and replacement

DIY Beadlocks

I haven't, just remember anti coning rings ~$80 and hardware ~$100. May make it a little more tempting to spring for Raceline steelies that are on sale right now at about $250 a pop.
 
  • Like
Reactions: Deep East TX LJ and JMT
bbaldwin237 said:
I know @PG. Had some but I don't know if he welded them himself. I was thinking @Wildman had some previously too, but I might be mistaken. I may be thinking of the stazworks wheels.

Rudy from Rudy's Adventure Designs also did a set for the OnX build challenge Ram Charger a few years ago.
Click to expand...

I had Humvee rims that I welded in new centers changing the BS to 4.25" and the BP from 8x6.5 to 5x5.5

1776708779696.webp


1776708817408.webp


New centers welded in and then added 1/2 rock rings

1776708915006.webp


They turned out pretty nice looking after powder coating

1776708985670.webp


The Stazworks are nicer and more like the Hutchinson rims than the Humvee rims are like.

20210916_144837.webp


20210916_132924.webp


20211101_122134.webp
 
  • Like
Reactions: MikekiM, Skylark, bbaldwin237 and 1 other person
  • Like
  • Wow
Reactions: lBasket, Deep East TX LJ and Wildman
bbaldwin237 said:
Watched a 4Runner bend a rock ring (looked like DIY beadlocks) on Saturday. Looked like 1/4" rings and it was hammered!
Click to expand...

That is the one drawback to steel wheels....

I have coldrolled rings on the Stazworks wheels which are supposed to help not bent the lip of the rim.
 
  • Like
Reactions: Deep East TX LJ and bbaldwin237
bbaldwin237 said:
I know @PG. Had some but I don't know if he welded them himself. I was thinking @Wildman had some previously too, but I might be mistaken. I may be thinking of the stazworks wheels.

Rudy from Rudy's Adventure Designs also did a set for the OnX build challenge Ram Charger a few years ago.
Click to expand...

They came with a set of tires I bought from marketplace. The PO welded them. I can’t comment on the building them. Going down to really low pressure was ok and they looked cool. Other than that they were heavy. I cut a sidewall with them on and I sold them a few months ago.
 
  • Like
Reactions: Deep East TX LJ, Wildman and bbaldwin237
Wildman said:
That is the one drawback to steel wheels....

I have coldrolled rings on the Stazworks wheels which are supposed to help not bent the lip of the rim.
Click to expand...

Motobilt sales anti-coning rings and centering plates that should help with that. But, tough wheeling can certainly take its toll.

I appreciate the information. I'll let you guys know on my build thread what I end up choosing.
 
  • Like
Reactions: Wildman and lBasket
I will say this, the Allied steel beadlocks I had weighed a LOT less than the Humvee dual beadlocks or the DIY beadlocks I've seen....

Deep East TX LJ said:
Motobilt sales anti-coning rings and centering plates that should help with that. But, tough wheeling can certainly take its toll.

I appreciate the information. I'll let you guys know on my build thread what I end up choosing.
Click to expand...

These coldrold rings are round steel that is added to the lips of the rims. After bending the lips on my Humvee rims I knew I wanted added protection for the lips of the rims. I thought I had a picture of the edges of the rims but can't find it.... I'll see if I can't get one....

Years ago some companies sold bent rebar to do this with in different rim sizes.
 
  • Like
Reactions: Deep East TX LJ and bbaldwin237
Deep East TX LJ said:
I can definitely see how those are helpful! Thank you.
Click to expand...

The rock rings do basically the same thing but IMO they make it harder to get to the valve stem & hold water/mud/rocks inside the wheel themselves.

PXL_20260131_210950711.webp


It's a constant battle of trade-offs when choosing.
 
  • Like
Reactions: Deep East TX LJ and bbaldwin237

Similar threads

M
Are these Walker Evans beadlocks or "streetlocks" (fake beadlocks)?
Replies
13
Views
2,977
TJ General Discussion
mojowrangler
M
bexar_bones
Hepta Mfg vs Motobilt rear bumper
Replies
8
Views
517
TJ General Discussion
bexar_bones
bexar_bones
The
Rock sliders
Replies
126
Views
9,882
TJ General Discussion
JMT
JMT
Fouledplugs
Beadlock wheels that are made in the USA
Replies
4
Views
15,232
TJ General Discussion
Fouledplugs
Fouledplugs
BentonJB
Dana 35 with 3.07 gears: Should I upgrade?
Replies
19
Views
12,620
TJ General Discussion
Midtenn
Midtenn
Collector grade Jeep Wrangler TJs for sale
Top Bottom
Back