Fluxor
@fluxoffroad From Central Florida
Latest activity Postings About
-
-
-
Fluxor replied to the thread 2004 LJ In Flux.Some updates. I got got the proto LJ Rub Rails back from the machine shop!. Now if I bend them with correctly we are making movement...
-
-
Fluxor reacted to mrblaine's post in the thread Need low profile taillights and Savvy has no ETA in sight with
Like.
I can sell a set of raw aluminum versions right now. What I don't have are the black anodized versions. If it is of interest, the ONLY... -
Fluxor reacted to jjvw's post in the thread Need low profile taillights and Savvy has no ETA in sight with Like.
Black Magic Brake taillights are very good.
-
Thanks Klay, This makes sense to me and matches my expectations. I drilled out the aluminum to match the Stainless piece once it was...
-
If you install it with the torx screws torqued through the holes, how would they not line up when preloaded together? As...
-
So if I understand this correctly, its normal to drill some aluminum out. No amount of preload was going to fix that slight...
-
That be where I found it. Thanks for the help as always! It’s .020 for the Dana 30 in case anyone is following along.
-
Getting the garage organized has been priority one. I've made multiple trips to the dump to throw out junk. Big progress has been in...
-
Okay I think we need to make it easier for you. I think I understand what you’re doing now. Put the everything on a table. Get the...
-
Fluxor replied to the thread 2004 LJ In Flux.Yes. There is no way to put holes in laminated sheet metal parts with multiple bends and have the holes line up. All in takes is the...
-
Just let the tab set in the body hole. If you like, you can grind it down abit but not necessary. The fender liner will stay in place.
-
Fluxor reacted to B00mb00m's post in the thread 04 LJK Repair, Redo, Recycle - The 3 R's of a First Build with Like.
@SilverLJR sold me some nice OEM soft uppers and threw in the newer style mirrors which I think completes the look nicely. When @Fluxor...
-
Fluxor replied to the thread 2004 LJ In Flux.You absolutely DO preload. The rockers are slightly over bent so the parts are in some tension when installed. Leave the bottom rash...
-
I did preload them. I think the answer is you dont get all the holes to align perfectly, and when you drill, it makes the hole bigger in...
-
-
Loading…
-
Loading…
