GregBelleville
TJ Addict From Anaheim, CA
Latest activity Postings Attachments Images About
-
-
GregBelleville replied to the thread Building a Rubicon for the Rubicon.I don't think you're going to be able to do a tummy tuck without also doing adjustable control arms, might also need a longer rear... -
Thank you!
-
GregBelleville replied to the thread Radiator fan hitting shroud.No, in fact it took me quite a while to diagnose that it was the fan hitting the bottom of the shroud that was making the noise I was...
-
GregBelleville replied to the thread Radiator fan hitting shroud.I had this same issue and it ended up being due to worn out motor mounts that allowed the fan to start hitting the bottom of the fan...
-
I only know of one Wizard... -Mac
-
GregBelleville replied to the thread Summit seat foam review.I finally got around to replacing my driver side cushion yesterday, I'd say it was long overdue! I'm riding high again.
-
-
-
GregBelleville replied to the thread The unfortunate TJ of the day thread.That's a poorly disguised decepticon.
-
GregBelleville reacted to explorerlyon's post in the thread Building a Rubicon for the Rubicon with
Like.
I have done the Rubicon a few times on 33" with a 3" lift. No issues. Upgrading your skid plates or at least add an engine skid. Rock... -
GregBelleville reacted to macleanflood's post in the thread Building a Rubicon for the Rubicon with Like.
-Mac
-
GregBelleville replied to the thread MORryde issue.When I was installing mine I folded up a piece of cardboard and stuffed it underneath the tailgate closest to the latch side, lifting...
-
When hanging the gate on the hinges, the latch side needs to be lifted up enough to compensate for the added weight of the tire. This...
-
GregBelleville replied to the thread New to me Jeep with unknown history; what things would you check first?.I'd say to check all of the suspension bushings as well as your steering joints, ball joints and u joints for wear, a preventive check...
-
I leave my soft top retainer brackets on when using the hard top also. But, I am thinking your gas shocks may be the issue here the...
-
GregBelleville replied to the thread Transmission cooler line replacement process.I can't comment on the process of replacing the lines, but since you didn't say specifically on your list and because I found this out...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
