Kiwi TJ
I don't suffer from insanity I enjoy every minute
Supporting Member
Ride of the Month Winner
That just shows the quality Savvy make
no pussy footing around with a tiny cut… go deep or go home 
What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
That just shows the quality Savvy make
no pussy footing around with a tiny cut… go deep or go home 
Installed my GMRS antenna.
From my research and what Midland says, mounting inside the hard top won't cause much restriction on it. Most time I'll use it in the spring/summer/fall and have the bikini top on.
From my research and what Midland says, mounting inside the hard top won't cause much restriction on it. Most time I'll use it in the spring/summer/fall and have the bikini top on.
I've been considering moving mine inside, would make wire routing soooooo much easier
That is one of the main reasons I wanted it inside. Also, with a top on, it will keep hands off of it so it doesn't grow legs and walk off.
Yup. Not at the gatekeeper. One of the ledges higher up. I found out later that someone else did the same at the same location I did.
Interesting idea. Please let me know if you notice any loss of signal.
Will do. It will be a bit before I use it and probably not before I take the hard top off. Although I could test it now with my brother's truck.
I swapped out the cheap lights in my rear bumper. I had to modify the opening but the mounting holes lined up great. Now just need to wire them up to the backup lights.
The rear is on my wishlist so I can dump my hitch but still keep the bike rack and cargo carrier
I might have bought another TJ. Should have confirmation by tomorrow.
They're on:
Saturday I'll get it's annual inspection. Wish me luck!
I also got the caps today, and I decided to go with the Gates, so that is installed, too!
And how many does this make
Two TJs and one JLU
My buddy bought a JLU this week and wanted to sell his TJ quickly so he made me an offer I couldn't refuse. We will sell it to our son. Very good rig.
Yup. Not at the gatekeeper. One of the ledges higher up. I found out later that someone else did the same at the same location I did.
Yep, unfortunately I have seen more than a few roll overs on those ledges.
Motobilts tail lights, smoked front markers, and chromoly shafts in the dana 30 till I inevitably buy a 44 front to match the rear. Threw in these red axle tube seal chinga's while I was in there. Same price as the plastic dust shield so figured I'd give them a go.
Do you have a link to the taillights? Been looking at converting mine.
https://motobilt.com/products/jeep-...-J02R9fB-Fzb5zxgkc1RLFw26LPZZtphoC2vQQAvD_BwE
On the pricey side as far as the "flush mount" lights go. But I was kind of into the no hole saw action
MountaineerTom
LJ Enthusiast, Retired USAF Weapons Loader
Supporting Member
Ride of the Month Winner
Note that the Dirtworx website says three week lead time but it was more like eight weeks for mine. He said he had been swamped with orders. Andy