I started using a MIDI fuse as an auxiliary post. https://www.amazon.com/LITTELFUSE-02981001ZXT-FUSE-HOLDER-piece/dp/B0195UTU6U/?tag=wranglerorg-20
Daily Driver, Go Where I Want To Build
- Thread starter jjvw
- Start date
No, he drives an extra wide older Suburban with a big ole Detroit Diesel motor out of a garbage truck riding on concrete truck Super Singles. Front winch is a 20,000 lb. PTO driven that does not look out place.
I finally know which vehicle you are talking about ! That horn is not out of place on that build.
OP
The second pair of horns are installed. The dumb thing is that I did such a good job of attaching the fenders to the body that there isn't a ground path to the battery! Which means half of my horns don't work!
OP
The fix is to run a jumper wire from the headlight ground to the horn mount. Now I have four horns again!
OP
OP
OP
The SwitchPros control panel is going here...
Included in the kit is a stainless steel mounting plate for the under hood controller. I cut it up for this instead.
Many hours, one dumb mistake and two trips to the hardware store later, this is it.
Halfway done!
Included in the kit is a stainless steel mounting plate for the under hood controller. I cut it up for this instead.
Many hours, one dumb mistake and two trips to the hardware store later, this is it.
Halfway done!
OP
Poor man's DyKem and tool abuse. Scribble with the marker and scratch with the calipers.
Looking forward to how you mount the controller, (since you cut the plate up)
Go back a page or two.
OP
Looking forward to how you mount the controller, (since you cut the plate up)
I solved that problem several weeks ago
OP
I finally committed to not subscribing to XM radio any time soon.
I left when half their radios in OEM cars couldn’t access all their channels. I found a stubby USB drive loaded with backup music hits the mark for out-of-service trail rides