Got hung up on a rock and tried to polish my driveshaft.
What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
You missed the splines farther forward.
I need to try harder to get them next time.
FWIW. Half doors for $420 in Va for those that like them. Uppers included.
https://www.facebook.com/marketplace/item/931121216677491/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp:5d304c88-4db6-45f6-a824-646e666b8dbb
https://www.facebook.com/marketplace/item/931121216677491/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp:5d304c88-4db6-45f6-a824-646e666b8dbb
Last edited:
Outlaw star
TJ Enthusiast
Are you referring to the hoist a top or the non OSHA compliant stairs?
What about no railing on the deck? No fall restraint system. No posted signage. No hard hat for an overhead lift. No lift plan. Use of unrated equipment in a lift. No spotter. No safety shoes.
I could go on. Come with me, and you'll see...a land of OSHA violations...as Matt on Diesel Creek likes to sing.
-Mac
Technically, those are not OSHA violations, since it's in your garage. The gubment doesn't control that (yet)...
Technically, those are not OSHA violations, since it's in your garage. The gubment doesn't control that (yet)...
Should NOT have said any of that!
Don't you remember when we used to laugh about exhaust fluid????
Those assholes took it and RAN!?
The first time someone said, "diesel exhaust fluid," I seriously thought it was a joke, like blinker fluid or Phetzer valves. Little did I know...
This is why I added blocking and outlets for 3 hoists in my shop. 2 Wrangler hard tops and one extra in case I need to lift something heavy out of my truck bed.
Not done to the jeep yet, but some parts finally arrived.
These are the new KB stroker pistons. They have a slightly higher compression height closer to the stock deck height (0.015" in the hole). They'll give me a better quench of 0.041" with my 0.027" head gasket and stock deck height.
It's gonna be a while. Work is busy and I've got travel coming up through Sept and October.
These are the new KB stroker pistons. They have a slightly higher compression height closer to the stock deck height (0.015" in the hole). They'll give me a better quench of 0.041" with my 0.027" head gasket and stock deck height.
It's gonna be a while. Work is busy and I've got travel coming up through Sept and October.
Last edited:
Kiwi TJ
Just asked myself if I’m crazy and we all said No
Supporting Member
Ride of the Month Winner
I always think SCAT is an unfortunate name for any company that sells quality products
I always think SCAT is an unfortunate name for any company that sells quality products
Me too! I don't associate it with the old 60s Dodge Scat Pack branding/slang.
As with alot of things, they're part of a conglomerate owned by PE along with AFR (heads) and Racetec pistons. They've got choices.
Outlaw star
TJ Enthusiast
Funny thing is, there was an experimental turnsignal that had a gel/fluid core to keep the filament cool. And Muffler Bearing was an actual tractor part.
I always think SCAT is an unfortunate name for any company that sells quality products
It's my favorite word IF used with a middle finger gesture. I don't have enough time to flip-off all the people that piss me off everyday with my driving job, so I use a decal.
"Scat! Leave me alone"
Couple little big wins over the weekend. Got my soundbar light working and LED swapped.
Replaced the plastic retaining clip for the lock on the tailgate. I just happened to have the exact part on hand. It locks now!
Replaced the plastic retaining clip for the lock on the tailgate. I just happened to have the exact part on hand. It locks now!
I would like more info on this please. Is this a one stage or two stage color. Is this a custom mix or premix. I like it a lot
I haven't posted in a while as I've been busy working on my motorcycles more than my jeeps.
That said, My Apex now has 33" tires on it and I don't want to put the spare on the factory mount with out reinforcement, so I sucked it up and ordered the morryde tailgate reinforcement kit today. I'm going to try it with the stock mount initially, but I think in the longer run I'm going to fabricate a new mount so I can suck the tire in closer to the tailgate.
Not a super exciting update, but I am looking forward to having the damn tire out of the tub!
That said, My Apex now has 33" tires on it and I don't want to put the spare on the factory mount with out reinforcement, so I sucked it up and ordered the morryde tailgate reinforcement kit today. I'm going to try it with the stock mount initially, but I think in the longer run I'm going to fabricate a new mount so I can suck the tire in closer to the tailgate.
Not a super exciting update, but I am looking forward to having the damn tire out of the tub!
Similar threads
