What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
Drove around checking open/closed loop monitoring O2’s.
Had fun, everything worked. Until it didn’t
Worked —> heat soked for about 15min while i was at the store—> open loop due to system failure
Drover around for 15 min until it jumped back into closed loop —> stayed there for a few min —> fuel system unknown. —> drove home, wiggled o2 plug ( upper) —> went back to closed loop, stayed that way for another 25min of idling while i checked grounds with multimeter
Waiting for GPT to go over the entire 55min video and ordered a NGK set while im waiting.
Good rabbit hole times ( o2 load jumpe between 0.08-0.9 the entire idling time)
Had fun, everything worked. Until it didn’t
Worked —> heat soked for about 15min while i was at the store—> open loop due to system failure
Drover around for 15 min until it jumped back into closed loop —> stayed there for a few min —> fuel system unknown. —> drove home, wiggled o2 plug ( upper) —> went back to closed loop, stayed that way for another 25min of idling while i checked grounds with multimeter
Waiting for GPT to go over the entire 55min video and ordered a NGK set while im waiting.
Good rabbit hole times ( o2 load jumpe between 0.08-0.9 the entire idling time)
Something like 100lbs right? Figure I'd put all these years on the bench press to work.
Installed new half door interior panels from Summit Racing. Fit an finish was great except for a missing hole on each panel, see pic. D side was missing the hole at the aft edge. P side was missing the hole at fwd edge.
Weighing on a scale beats figuring. Mine weighed 60 lbs dry.
It is nothing when compared to an Atlas. That sucker takes a transmission jack. And a couple of colorful metaphors.
Since I was able to lift it I wasn't concerned with actual weight so I was referencing my memory of the number of grunts it took to get it in place, one if I remember correctly.
@red02tj does this meet with your time line, still have to add the radiator snubbers and drop the fan shroud tomorrow.
I’ll accept it.
Thank you kind sir.........
Pantera99
TJ Enthusiast
Boo 
Lost my clutch in the fast lane on the US60 stopped in traffic. Managed to get her in 3rd & made it a few miles to an exit with some room for a tow truck. Hydraulic fluid everywhere. At least it wasn't super hot out today.
Lost my clutch in the fast lane on the US60 stopped in traffic. Managed to get her in 3rd & made it a few miles to an exit with some room for a tow truck. Hydraulic fluid everywhere. At least it wasn't super hot out today.
If I remember correctly, it weighs 130 lb!You should try the 4 speed...
Outlaw star
TJ Enthusiast
Yet people call me a monster when I say "I'll be in the shop punching cats"
@John Cooper inspired me to start early, so I added a friend.
View attachment 708339
View attachment 708340
Love it boog!!!
Finished the grill snubbers, and got the Fox remote reservoir shocks installed. Now trying to decide if I want to install the spare radiator and water pump.
Similar threads
