So I took my skid plate off a couple months ago after I bought it to diagnose my transmission leak and also clean it. Well I stripped the nutserts pretty good and It was a PITA trying to screw the bolts back in because there were barely any threads left, I am actually running 2 bolts on one side as I could not get one in. So my problem is PO welded a piece of metal onto the frame for drop and Im assuming the only way to remove and replace the nutserts would be to cut the metal spacer off? I was thinking I can just grind it off with a wheel and then reuse the piece of metal for the drop minus the weld? or would I have to weld it back?
https://www.shop.blackmagicbrakes.c...-2-13-Nutserts-87-02-Jeep-YJ-TJ-04-NSK-04.htmIm pretty sure this is the right kit, it is a 1" drop but the threads in that kit look longer than the ones I have in right now, But that shouldn't matter too much.
https://www.shop.blackmagicbrakes.c...-2-13-Nutserts-87-02-Jeep-YJ-TJ-04-NSK-04.htmIm pretty sure this is the right kit, it is a 1" drop but the threads in that kit look longer than the ones I have in right now, But that shouldn't matter too much.