Search results

Anyone happen to have a source for the OEM Mopar camshaft position sensor for an 06 LJ 4.0? I can't find any sources for them who has them still in stock, called dealership and they can't find one either.

Well, update here. Tried torx first. The t55 is about the same size as the stripped m10 hex, so it wasn't quite big enough. T60 was slightly too big, and I wasn't able to get it deep enough to bite well and just stripped it more. Ended up welding a cheap 3" long 3/8" extension into the hole and...

Well, it happened. Stripped the drain plug on the transfer case. Fill plug came out fine. After heat, PB blaster, tapping - thought it was coming out..but stripped instead. Any tips/tricks? First instinct is order an ez-out that will fit nicely in the nice round hole that's there now. If that...

There's a sticky in the resources forum. https://wranglertjforum.com/threads/upgrading-the-sound-system-on-your-jeep-wrangler-tj.11104/

The 05 and 06 HVAC w/ AC controls are different than the 99-04. I need one for an '06.

Good deal. The arduino's built in regulator should have been able to handle cleaning up the supply power though, however if it was over 12V (charging from the alternator) - maybe it had issues? Also - I'm not sure the Arduino will run with 5V to the Vin line - Vin normally requires 7-12V. You...

That's interesting although not unexpected from running the Arduino off the direct +12V line. Do you have schematic and code for the new implementation? I see at a minimum you are now using the reference voltage at the same voltage as the Vdd of the digital pot as well as the Vin on the...

Didn't notice this before - but you added some caps to the PCB design that were not in the original list - guessing they are for power filtering? Doing the math, the PCM would see the following for possible resistance values - this assumes 1% tolerance resistors on everything, and calculating...

What year is the AC control?

For cable shifters - Savvy, Novak - those are the better ones. Steinjager makes a knock-off for cheaper, not sure the quality - they seem to have lackluster reviews on the normal sites (~3.5 stars) If you want the two rubber bushings that hold the bracket to the tub that I didn't shred..I'll...

@dockdoc - I don't have all 4 rubber bushings, but I do have two of them and the parts pictured below (and the rest of the linkage if required). My experience with the rubber bushings was hit or miss. Half of mine (2 out of 4) came out undamaged - but I wasn't trying to save them either. Maybe...

I have thought about giving https://jlcpcb.com/ a try - but 5 of them is $2 + $9 shipping ($11 total) and 35 days from China. The speed of a US based supplier may be worth it.

Can you find a photo online of your missing T-case pieces and share? I may have what you need as I just installed a cable shifter last week. As for the rubber bushings - are you referring to the ones that the linkage rides on or the ones that hold the bolts through the tub for the bracket? I...

Excellent work! I'm a bit rusty on my coding (Mechanical engineer, not software guy - just enough to be dangerous) but a couple of questions: Did you mean to set the pin mode of SWI_CRUISE_ONOFF_PIN twice in setup? I wonder if you could use the 50K version of the MCP4261 and the 2nd pot to...

Well done, and doesn't look that bad. I look forward to the how-to. I assume you'll have the schematic and code? I've been thinking of trying some custom etched PCB using the MSLA 3dprinter - this may be a good candidate.

good to hear they got it straight. When I had mine aligned, I took it to the guy the offroad shop in town recommended and it was...okay. I'm tempted to take it someplace else to have them rack it up and see where it's at. I have adjustable arms upper and lower in the rear, and lowers in the...

The Jeep offset ball joint tool helps immensely. Can also just free rental a press from the usual auto parts store. They may not have the special Jeep adapter though.

What do they suggest? me too... although mine may be a UCF aluminum one..

Those running the add on fuse boxes - @TurboTJ & @Mr. Bills - have you any concerns or problems running 40A on the boxes? All the ones I have found are rated 30A max per circuit. The Blue Sea Systems 5023 is 30 A per circuit, 100A total. The other 6 fuse ones I find on amazon are also 30A per...

So, I know I can get this from a paint supply store or the dealership, but curious if anyone with the black jeep has had any luck with paint match with something off the shelf? Before I try another paint (the duplicolor perfect match universal black seems closest?) - I thought I'd see if anyone...